I suggest you sew a dress, the pattern of which is so simple that those ladies who have a small skill in the sewing will build it right on the fabric.
First a little about the model.
A straight silhouette dress, a little narrowed to bottom, with a solid sleeve and a boat.
In the center of the shelf, some it may seem superfluous, but it lies a small trick. The seam visually shares the front cloth into 2 parts, thereby making the silhouette visually slimmer.
Therefore, especially complete ladies, I would recommend to make such a seam on dresses.
The fabric will suit a ward, costume, knitwear and D.R.
Pattern.
Measure the gripping of the chest and girth hips, which girth is greater, it will be needed to build patterns.
For example, the gripping of the breast is 96 cm, and the girth of the beer is 94 cm, it means that I take 96 cm into the calculation.
96 cm + 4 cm (purchase) = 100 cm / 4 = 25 cm. 25 cm will be the width of each half of the shelf and the back.
We start building the pattern on the back.
In the drawing, I visually showed where and what measurements to postpone.
It remains only to make a sleeve.
The back is ready. Now I cut it out and we will build a shelf on it.
The shelf will be identical, only we will inhibit the neck and make a balance on the chest.
Since the dress without breast paddling should be done necessarily.
It ranges from 1 to 3 cm, the more breast size, the more centimeters balance. To postpone the balance point of the shoulder start up to the desired number of centimeters. Next, deepen the neck.
It remains only to make a curly cutout on the chest.
Making a small amount of money on the chest. In the finished form on the edge of the Myster will pass the jumper, it is applied separately.
It will only take to collect all the product.
I hope that explained everything is clear.