![Shelf for shoes of its own production, myth or reality?](/userfiles/37/4937_1.webp)
I remembered the well-known number from KVN about married couple Igor and Lena. Lena has a lot of shoes, she ranked a whole wardrobe. Igor begins to liberate shoe boxes and dismantle the irrationality and wastefulness of his wife. The hall laughs, men applaud standing. At the very beginning of Igor, with one pair of shoes for all occasions. At the end of the room, peaceful sitting next to his wife, her husband utters a corona phrase:
- I realized how many pairs of shoes a woman for happiness should be.
- How many?
- One more than she has.
What Lena answers:
- Two.
What instructive conclusion can be made from this story? It is necessary to store your shoes correctly and gently, and then no one will find out how much you have it and why she is in such quantity.
Now we will focus on the problem of storing a weary shoe, simply speaking, we will tell you where to hide the pile of shoes, slippers and boots from the angle of the hallway. A simple and rational solution is to place on a shoe shelf. The option with the purchase of this object of furniture in the store only at first glance seems simple. Such a small-sized thing is not so easy to find, as a rule, it goes in a set of furniture for an entrance hall. Separately, it is not always possible to choose something suitable in size, design and wallet. But you can always make it yourself.
And here we come to the rescue and fantasy and skills obtained in labor lessons.
Mass options, consider some of them.
![Heap of shoes in the hallway](/userfiles/37/4937_2.webp)
How to place shoes at home
To begin with, you need to solve from what you want, and most importantly, you can make a shelf for storing shoes. Materials for this can be used different, each of them has its drawbacks and advantages. The product from PVC will be easy by weight, convenient to care, because it can be calmly washed, but in order to work with it you need a tool and skill. Tree to everyone, except that the tool, place and at least elementary knowledge of the carpenter need to work with it. With cardboard, it is easy to work, conveniently, but when used can be deformed from moisture pressure and exposure. Watch the proposed options and decide on whose side you.
Shelf for shoes "Polyennitsa" from PVC pipes
The rack is made of PVC pipes
This option is suitable for accommodating homemade, summer and demi-season adult shoes or for any nursery. High boots will have to be put separately.
We purchase a sewer pipe from PVC, with a diameter of 30 cm.
Cut the knife to the section 30-35 cm long, depending on the maximum size of the shoes in the house. 30 cm longs are sufficient for 42 sizes. If you need more - attach the shoe to the pipe and measure the required length.
Cut the pipe on parts for the manufacture of sections for shoes
The edges are processed by shallow sandpaper so that they become smooth.
Cropped edges process emery paper
Since the shelf is called the flight, we glue the cuts of the pipe with wallpaper under the tree. If such a design does not fit into the overall concept of the hallway, select another drawing, more suitable for style and coloring.
We glue the section wallpaper
Four billets glue with each other epoxy glue purchased in a construction store. Fix the row with clothespins, pliers or special clamps, if any.
Stretch fragments of stellage
In the same way, we make two more rows of three blanks in each.
We will negate that one of the many options for combining fragments of the structure is offered. At your request, you can assemble the shelving for shoes of another form and size. Sections can be as much as you like, up to take them all the wall, if it is functionally justified (it is inconvenient to get shoes from a high height, but you can arrange the non-seasonal or rarely used instances).
We collect "Fully" from three rows of cells in the following order: downstairs at the top of the rows of three sections, in the middle - from four. Put at the wall.
The rack consists of three rows of shoe storage sections
Voila, the original shelving for shoes is ready.
Everyone is good for the "Polenitsa" rack, but Lena from KVN he would hardly come up. After all, the exquisite shoes on the heel can be shoved there, but somehow not commilfo. Especially for Lenin Triggers there is a mega Simple version of a shoe shelf called "Cabinous"
Photo: Options for storage "Cabinis"
Heel shoes comfortably post on the cornily
You can organize a whole shoe rack, attaching several eaves to each other.
Unusual use of the eaves, as shelves for "studs"
Take any window cornice, cut off part of the desired length.
Attach the cornice to the wall.
We cling to shoes with heels for cornice and hang. It turns out a witty shelf for favorite heels.
Wooden shelf "Schever" with your own hands
Boots, sneakers and other shoes are convenient to store in such a shelf
Over the manufacture of this shelf you need to work a little more than above the previous one.
It is made of plywood and shoe climbs.
The first thing to determine is the length and width of the future shelf. In order to calculate the length as accurately as possible, the plywood parameters and the number of brushes that you intend on this plywood should be accommodated. The width of this part of the shelf must be 5 cm more than the width of the brush.
Deciding with the parameters, cut out 2 identical blanks.
We connect them between "book" as shown in the picture.
We make the first billet for shoe shelf
Drill holes on the long part of the shelf at a distance of 1 cm from the edge. Put the second board with the end and connect two fragments with screws. On the sides we join the square of the same width of the same plywood.
If the brushes with handles, cut off the handle. Circuit edges align with a file.
Cut the handles at the brushes in the manufacture of a shoe shelf
In each brush from two sides drilling holes. We screw the brushes to the inner surface of the shelf with a bristle outward, as shown in the photo. The first part of the shelf is ready.
Attach the brushes in the inner box of the first part of the shelf
For the second part, we take a sheet of plywood and make it the same length, as the first, and 35-40 cm wide, depending on the largest shoe size in the house. 35 cm width is calculated on shoes 43 sizes.
The second part of the shelf "Schetka"
We pump up another one to the same length, 15 cm wide.
We attach a small board to the small boards to a big way to get a side (in a large one of 1 cm from the edge drills the holes, put a small end and pound the screws into the holes on one side and in the end of the plank on the other side).
With the opposite side of the side of the side drilling 3 holes closer to the corners of the big board as follows: one hole with a long side, two with a short one. The distance between the holes depends on the width of the first part of the shelf with brushes inside. Suppose the width of the shelf is 15 cm, then the holes are made at a distance of 2, 12 cm from the corner. On the long side we make an indent of 5 cm from the corner.
Collect parts into a whole shelf
With the help of screws, we collect the shelf of two billets.
Pray the finished shelf in a loved color. After drying, the paint drills 2 holes in the central board and Krepim all this magnificence to the wall.
Comfortable and beautiful shoe shelf Ready
For the same principle you can make a simpler option. In fact, it is just two planks, nailed to the wall parallel to each other at close range.
Shoe shelf for a small hallway
Rack for shoes "Carousel"
Round Cutter for Shoe With Rotary Mechanism
If the family has a person with a carpenter's skills, which has a tool and workshop, and at the same time, for some unknown reasons, it does not know how to make a shelving for shoes, show him this video. On the screen everything looks easy and accessible. Only for starters need to be prepared: a sheet of plywood, nails, glue for wood, swivel circles, paint.
Simple making pockets from cardboard "Guests on the threshold"
Cardboard pockets for shoes are moving quickly and just
Cardboard against waiting is often used in the manufacture of sections for storing shoes. Although it sounds a little fantastic. The video shows how to make durable and original pockets for storing slippers and summer shoes, armed with only a cardboard box from under vacuum cleaners, scissors and good glue. Such a thing can easily make even the most physically not prepared layers of the population - old men, women and children. So, deliver household equipment from the boxes and proceed to an active view.
Another cardboard version of the shelving for shoes from the series "Waving together with children."
Rack for shoes "Triangle"
We take all the same cardboard boxes, the designer potential of which is inexhaustible as an atom.
So, we will need: cardboard boxes, color wide tape, scissors, ruler, glue.
From the cardboard, we cut the rectangle with the sides of 45x35 cm so that even the large-sized shoe found on the shelter.
With the help of the line, we make 2 bends at a distance of 15 cm from the edge of the long side.
The edge of the side, from which the bends vertically go, are crying for a scotch - it will be the front facade of our section.
Storage sections are made from a cardboard box
In the bends we put a triangle, we take a scotch with the top along the edge, as well as in several places in the collapse.
From triangular sections Collect the shelving for shoes
Similarly, we make in our case only 13 sections. You can vary this number to any side at your discretion.
We collect the lower row of the rack from four sections. We glue with a scotchball. It is possible to stop at this, and it is possible to glue the cardboard sheet glue to hardening the design, but this will not add to the elegance of your design.
Stretching the shelving section for shoes
We collect a second row of five modules, fasten each other and glue a tape to the bottom row. Etc.
So easy and just you can make a rack for shoes from cardboard
Attention! The feature of cardboard structures is that it is impossible to store wet and dirty shoes in them.
Bedside table "Magic box"
Do you live near the grocery store and you are annoying the warehouse of boxes under the windows? Your husband bought a beer drawer and now you have a drunk man, glassware and an empty box? Then you are lucky! Make a bedside table or shelf for storing shoes, because physical work soothes nerves!
The plastic box can be simply moved to the wall in the hallway, fall asleep with rubble and put in it dirty and wet boots and boots. And also for these purposes, you can use the pallet with sides or plastic tray.
Pallet can be replaced with a plastic box
Several boxes are easily sealed between themselves with a plastic homutic or ordinary wire, put "on the ass", move to the wall, and it is better attached to the same wire to the pipe or some more standards and now we are already several sections for storing shoes or something yet.
Boxes are bonded with each other, it turns out a rack
Wooden drawers will have a little tinker.
Treat the surface of the box with shallow sandpaper.
Cove the paint.
Hang on the wall.
You can also adjust the wooden pallet.
![Shelf for shoes of its own production, myth or reality?](/userfiles/37/4937_29.webp)
Such a shelf for shoes do not just, but very simple
![Shelf for shoes of its own production, myth or reality?](/userfiles/37/4937_30.webp)
The pallet, if desired, can be converted to a comfortable shelf for shoes and bricks
![Shelf for shoes of its own production, myth or reality?](/userfiles/37/4937_31.webp)