There is no need to acquire containers and shelves for things in specialized stores, because you always have the opportunity to create them yourself. They can be used in the children's room, in the kitchen, in the country and even in any other room depending on the selected decor. The following is a weaving from newspaper tubes step by step, which was developed by the Master Valusha_Alex.
Cut the cardboard on rectangles with sizes 15 to 20 and 15 by 28 cm. These are future walls and each size must be represented by 8 parts.
Cut the bottom of the size of 20 to 28. For the bottom it is necessary to prepare 8 such parts.
Glue boxes, use greasy tape for this. As a result, you should get 4 boxes with the following parameters:
- Length - 28 cm;
- width - 20 cm;
- Height - 15 cm.
Use drill and long needles at number 3 and 5 to turn the tubes from a variety of old logs, directories. You can give preference only to glossy publications, while they should be thin enough. The tubes must be 7 cm wide.
At the next stage, the box of newspaper tubes is fluttered step by step.
After each box of newspaper tubes is collapsed, cover the finished products of the primer and wait until it dries.
After drying the primer, cover the surface of the paint. To do this, take a plastic mold convenient for you, place a package in it and mix the kolas in it that you have chosen. The use of a package in this case is a very convenient solution. If the paint remains, it can be tied up and she does not dry, without unnecessary hassle you can throw it out and comfortably hold in your hand. You can try to try with a sponge, but it is best to use a round building brush - it is much more convenient, but to paint it faster. In order for the divorces to be seen at the end of the painting, treat the surface of each wall by the "combing" movements.
After the paint is completely dried, the box of newspaper tubes should be covered with acrylic.
9. Cover the box with varnish.
To enjoy the outside of the bottom, use fine white paper. Each sheet is pretty remember in the hands and glue the bottom of the box with the help of PVA glue.
After the glue dries, paint the paper of the same paint and apply acrylic on protruding folds. It remains only to sew covers and find a suitable place for the boxes.
We sew a tissue tab for our box of newspaper tubes.
Purchase a suitable tissue. It can be cotton with any pattern. Use the following pattern. Consider that the size of the inner part of the box is 95 cm, and the external one - 100 cm. Therefore, the size of the challenge should be sufficient so that it can be pulled into the box.
Use 3 details for the box. The central part is the wall, bottom, one more wall and 2 tackle (19 + 19.5 + 19 + 2x4) = 57.5 cm. Powder must be 2 cm.
The side details are characteristic of the trapezoid form, where the inner width of the box corresponds to the smaller side - 19.5 cm. Taking into account the external perimeter, the upper side is calculated. If you do not want that on the wide side of the box there were seams on the weapons, make a trapezium on wide sidewalls.
