![Wire Dinosaur Sculpture](/userfiles/37/4879_1.webp)
This article will consider various wire products. For some souvenirs, you will need threads, pieces of fabric, beads, wool and other materials. Check the result with illustrations. The most common crafts made of copper wire with their own hands that people are doing for the holidays will also be described.
Ideas for crafts from wire do it yourself
From this girlfriend you can make a variety of diverse souvenirs. Below is a list of what can be made of wire yourself.
![Lampshade from wire](/userfiles/37/4879_2.webp)
Lampshade from wire
![Dragonfly from the wire](/userfiles/37/4879_3.webp)
Dragonfly from the wire
![Decorative Cell from Wire](/userfiles/37/4879_4.webp)
Decorative Cell from Wire
![Kanzashi from the wire](/userfiles/37/4879_5.webp)
Kanzashi from the wire
![Month from the wire](/userfiles/37/4879_6.webp)
Month from the wire
![Wire cloud](/userfiles/37/4879_7.webp)
Wire cloud
Christmas tree
The easiest option is a spiral product. The height of the Christmas tree 15-20 cm should not be less than half a meter of the wire, and preferably - the meter. But here a lot depends on the steepness of the spiral angle. On the Christmas tree you can hook garlands or green threads with hanging ends.
![Crafts from Wire](/userfiles/37/4879_8.webp)
An interesting new year product
![Wire Christmas tree](/userfiles/37/4879_9.webp)
Wire Christmas tree
When building such a decoration, remember that the metal is well heated and the electricity is perfectly perfect. So if you are not sure about the safety of garlands, it is better to refuse such a design.
![Wire Christmas tree decoration](/userfiles/37/4879_10.webp)
Wire Christmas tree decoration
Another New Year's option - a Christmas tree with the addition of tinsel. On the trunk of the tree, the wire is needed by the corresponding length, and on each pair of branches - with the addition of 1-1.5 cm.
First, Mishur is worn on each wire, which will reduce the slip. Then the wires are screwed onto the barrel with 1-2 turns or "tied" by them.
![Crafts from Wire](/userfiles/37/4879_11.webp)
As an asterisk, you can use a wire, but it is better - a soft toy, since a heavy christmas decoration homemade tree may not withstand
Spider
It will take 8 identical wires and 2 beads. All materials should be one color and shade.
![Crafts from Wire](/userfiles/37/4879_12.webp)
Step-by-step making souvenir
Beads need to be riveted on one of the wires so that the distance between them is minimal. The rest of the pieces should be tied up around the space between the beads. Then you need to bend legs: the insect is ready!
Egg
It seems that the bulk egg is made very difficult. But if you take the present and wrap it with it, you will get a very elegant design. How to extract an egg? You need to break it carefully, otherwise there is a risk of moving a gift. You can also take a syringe and a thick needle and suck all the contents of the egg.
After that, you can safely reach the remnants of the shell. To make the pattern from the wire is pretty, it is recommended to cross it in the winding not at right angles, but under sharp.
Sand for butterflies
For the manufacture, a thick long brass wire and a large piece of mesh or a mesh fine tissue will be required. To make a net, you need to bend in the form of a wire circle. The inner diameter of the circle should be about 30-40 cm. Wire ends need to be connected by tapping them with each other.
Next, from a piece of fabric, you need to make a bag. It is not necessary that it was some kind of defined form. But it must necessarily be quite large and long, but at the same time. The bag is attached to the wire with a needle and thread.
Stand under hot
It will take either thick durable copper wire or 2 thoughts. They must be very long (at least meter). A wide range will also need. If there is no thick wire, then you need to twist 2 thin spirals about each other (like DNA). Below is a brief step-by-step instruction with a photo.
First you need to wrap the wire around the line.
The resulting cracker must be accelerated so that the rings break into different directions.
As a result, something like the sun should turn out.
The ends of the product are firmly fixed with each other. Stand ready!
![Crafts from Wire](/userfiles/37/4879_13.webp)
Carefully wind the wire
![Crafts from Wire](/userfiles/37/4879_14.webp)
Intripping the product
![Crafts from Wire](/userfiles/37/4879_15.webp)
We form "Sunny"
Salnament
You need to take 4 wires about 40-50 cm and 4 about 10 cm long. Couples Wire must be wrapped around each other, so that one thick wicker "BACKEK". The resulting rods should be beatened in the form of a petal with curls at the ends.
![Crafts from Wire](/userfiles/37/4879_16.webp)
Billets for the Napader
Next, you need to take a pair of short wires and also twist them to get fat "ropes". They connect the previously constructed designs to the bottom so that short wires served simultaneously and connecting the element, and the stand for napkins.
Chamomile
It will take 12-15 aluminum short (3-4 cm) wires, one long copper (10 cm) and one medium brass (5 cm) wire. To make petals, you need to bend aluminum products in half. Copper wire will play the role of the stem, and the brass twisted in the spiral is the role of a yellow core in the middle of the petals.
Petals and stems are attached to a spiral core with a wire screw. To the flower looks more beautiful, it can be decorated with beads. On the spiral in the center of the flower you wear yellow beads, and on the petals - white. It is better to ride green beads on the stem.ladybug
To make a key chain, you need one long wire and 4 short. From the latter it is necessary to make legs, and from a long - body. For the manufacture of the head, another medium wire will be required. The abdomen are made by the type of egg, that is, bend in the form of a three-dimensional hemisphere. On the "Torbish" you can drive red and black beads. The first will serve as a background, and the second - specks.
To make your head, you need to wind wire around the "abdomen" so that the loose ends hang far ahead. Then near the abdomen make an arbitrary lump from the wire, but so that the ends come forward and form the mustache. Last but the legs are attached
Octopus
Below is a beautiful latch of wire. Despite the beauty, the figure is pretty simple. It is important to choose the right elements for the frame, around which the wire is wrapped.
![Crafts from Wire](/userfiles/37/4879_17.webp)
Beautiful souvenir for home
It is necessary to start with the end of the octopus tental. The wire is suitable for the base of the tips, for a wider part you can use a pencil, and for very thick, the tental is a finger. Initially, it is more convenient to make a tentacle straight, and already begins them.
For the torso use an egg or any other round, but a soft object that can be removed then. For eyebrows, they first make the frame in the form of a wire, around which is wrapped with another wire. Eyes can serve great beads.
Animals
Any animal (dog, hamster) is simple enough, even though it will take a lot of time. To do this, you need to form a skeleton, as in the figure below. Wide parts of the beast (head, hips, torso) need to be made using rings. Narrow (tail, paws) can be made in the form of separate wires.
![Crafts from Wire](/userfiles/37/4879_18.webp)
Wire dinosaur
Actually, the creation of a skeleton is the most difficult and responsible moment. For confidence, use photos from the Internet. It is necessary to carefully wrap the wire around the frame. Try to act CAUTION, so as not to go through the skeleton itself. You can even try and create wool for peeling, as in the photo below.
![Crafts from Wire](/userfiles/37/4879_19.webp)
Metal dog
![Wire Dinosaur Sculpture](/userfiles/37/4879_20.webp)
Wire Dinosaur Sculpture
Bird
Birds (roosters, herrock) can be done by the previous example. That is, first the "skeleton" is created, and then the wire is wound around it. For the stability of the figure, you can make a nest so that it serves as a platform.
![Crafts from Wire](/userfiles/37/4879_21.webp)
Bird from wire
When creating birds, there is a problem with open wings. I want to make them beautiful, but it does not always work. For feathers all stood in short, and the wings were symmetrical, you need to take the full body of the bird first, and then attach to the wing the border of the rear edge. At this border you need to make feathers and put them in short. After creating a beautiful wings, the border is cleaned.
Flowers
To make a beautiful neat flat flower, you need to start it for starting on paper, and then bought the wire on the ornament. If there are very cool lines in the figure with a narrow bend radius, then you need to use forceps or passages with narrow lips.
![Flowers from wire](/userfiles/37/4879_22.webp)
Flowers from wire
![Wisteria beads and wire](/userfiles/37/4879_23.webp)
Wisteria beads and wire
Make wire crafts can be each, even a novice handicraft. This can also be engaged in adults in their free time, and children at leisure. Carefully examining the instructions and choose the necessary materials, you can create a real masterpiece.
![Heart of threads and wire](/userfiles/37/4879_24.webp)
Heart of threads and wire
![Panel from wire](/userfiles/37/4879_25.webp)
Panel from wire
![Wire chain](/userfiles/37/4879_26.webp)
Wire chain
![Chandelier decor wire](/userfiles/37/4879_27.webp)
Chandelier decor wire
![Figurine in the form of letters from wire](/userfiles/37/4879_28.webp)
Figurine in the form of letters from wire
![Suspension with a stone from a wire](/userfiles/37/4879_29.webp)
Suspension with a stone from a wire
![Earrings from wire](/userfiles/37/4879_30.webp)
Earrings from wire
![Hooks from wire](/userfiles/37/4879_31.webp)
Hooks from wire
![Pendant from wire](/userfiles/37/4879_32.webp)
Pendant from wire
![New Year's crafts from wire and beads](/userfiles/37/4879_33.webp)
New Year's crafts from wire and beads
![Candle decor wire](/userfiles/37/4879_34.webp)
Candle decor wire
![Multicolored Wire Guitar](/userfiles/37/4879_35.webp)