One of the main elements of furniture in the hallway or corridor is a wall hanger. It is different in type, form and sizes. You can go to the store to choose the one that you like, or make it yourself with your own hands.
An extraordinary wall hanger in the hallway
In any case, it will be necessary to take care that it fits into the overall interior of the room, was functional and beautiful.
What are the wall hangers?
Despite the fact that it would seem that this category of hangers does not constitute something unusual, but it is not. Wall hangers are different, and now we will try to find out what exactly.
First option The most common and looks like a conventional design. It is a metal or wooden bar on which hooks are nailed. Usually such models can be found in small hallways "Khrushchev".
Planck with hooks in the interior of the hallway
A slightly complicated version of this design is represented by an additional shelf from above. It is intended mainly for hats.
Planck with hooks and shelf
It is important to note that in this version it is worth consider the amount of hooks. Usually, they are fixed from the calculation of two hooks per family member.
Second view Wall-mounted hangers are no less popular. It is represented by a typical panel that has planks or rails (can be different long). It looks like a hanger stylish enough, and most importantly aesthetic. At the same time, the hooks in such a design can be placed at different levels, which makes the subject of the interior quite interesting.
Design hangers with slats
Third option There will be a creative approach to the case, which means that a wall hanger can be represented by various interesting and unusual hooks, which will be "crushed" along the wall, or merge into some drawing (for example, "tree").
Creative unusual hanger in the house
Hanger "Tree"
From practical recommendations for wall hangers, it can be noted that since this type of hanger is open, it is important to arrange fastener fittings so that it does not throw in the eye. Also do not forget to treat the subject of moisture resistant and anti-corrosion facilities.
Materials
From what product material you prefer, not only appearance, but also how much it will serve.
The most economic segment is a plastic hanger. Posted by a variety of color variants and models, it is distinguished by a lightweight construction. As a rule, consists of a wide plank with a holder for things. It is usually done in elementary minimalist style. To betray her the highlight, you can work a little and make it taste.
Plastic wall hangers for an entrance hall
The second classic option is a wooden hanger. It is solid or collected from several separate panels. Such material product perfectly fit into most of the styles and interiors, and it will also support environmental purity in the house. It is quite practical in use, it is inherent with a decent decorative characteristic.
Wooden hanger in the interior
Another popular option is a metal wall hanger in the hallway. In the design plan, it will also be suitable for many interiors. The only nuance that can embarrass the consumer is the weight of the product. But in most cases, manufacturers try to make it easier to facilitate the design and make it practical in use.
Option metal hanger
In the elite ranks of wall hangers include wrought goods. They are not sufficient in price, but they look beautiful. Since most often such a hanger is made manually, it bears the character and a piece of the soul of his author.
There are still combined options, but most often they are made exclusively under the order.
Beautiful wrought hanger in the hallway in the photo
How to make a hanger in the hallway with your own hands
To make a hanger with your own hands you will need elementary tools and understanding in the drawings. In fact, nothing complicated there is no, the main thing is to pay a few of its time and inspiration.
Wall model hanger
Nastya hanger in the hallway do it yourself
The main part of such a product will be a shield on which it will be necessary to place hooks. It can be left in solid form using a sheet of plywood or wood plate, or a little variety design, making a lattice option. It will be a little easier than the previous one, besides, it will go here almost two times less material.
Materials for work that we need:
Hacksaw or jigsaw.
Shurtholder.
Blowtorch
Awl.
Sandpaper.
Board.
Hooks.
Product scheme
Progress:
First of all, you need to decide on the length of the hanger and cut off the desired piece of the board. You can use a tree or paneur, depending on the material you have.
With the help of the jigsaw, create the edges we need. They can be rounded, square, wavy, in the form of a trapezoid or rhombus.
After we have decided and made the edges, the product is sandwiched and grinding. Now our surface will become smooth and you will need to betray the workpiece.
Next, you can burn the boards using the soldering lamp. If you do not have it in stock, do it using a gas mounte. This is not the most successful option in terms of hand safety, but in this way we can betray the product the right shade of the board.
The next step will be the fastening of our wall hanger. There are two options that you can use:
Hinged. This option will assume that on the inside of our design we are keping "ears". They are a tin or metal bar, rounded from above. They directly drill holes for fastening. The secret will be that the longer the dowel with a screw - the more reliable to hold our design.
You can attach a hanger directly to the wall itself. To do this, we need to drill a few holes in the blackboard. Their quantity will depend on the length and width of the base, as well as the load that the hanger must withstand. This method will be more reliable in terms of operation of the structure.
The final stage in the work will be the choice and fastening of hooks. It will be necessary to think over the number of rows to determine how many hooks it will be needed. Basically the best scheme of their placement is the distance one from the other about 15 centimeters. It is not necessary to do in one row - you can scatter a little on the board.
Fixing hooks on a hanger
Non-standard hanger from Elk Rog
The previous wall hanger version was more standard that can be found in a regular apartment. Now consider a creative approach to this subject, namely how to make a hanger from Elk Rog with your own hands.
Rosina Horn hanger do it yourself
To fulfill the task, we need the following materials:
Nadfil.
Varnish and brush.
Sandpaper.
Saws and shurtholds.
Drill.
Scheme of hanger
Progress:
First of all, you will need to get the horns of the appropriate size. It will already be a half business.
Horn for hanger
The second step complements the first. In order for the product to look much more beautiful, you will need to do the basis for it. The most creative and interesting will look a wooden slept in 5 centimeters with a crust. For such a basis, you will need to get a well-dried tree.
From the practical recommendations on the score of the choice of wood, it can be noted that a beautiful barrel and color have apple and pears. Wood from these garden trees will look most beautifully and combined with our horns.
Do not forget to pre-make wood processing so that there are no sort of pests there. Also, the tree can be treated with varnish or other means.
Hanger of horns in the interior
Be sure to handle the horns. It is best to use a feet for this. We discover them the textured part towards along the corrugated elements of that area, which is closer to the headboard. The rest of the part is processed by the usual sandpaper.
For the legend of the horns of exquisite shine, they process them with a thick layer of varnish. It is best to apply in 3 layers - this will ensure the beauty and durability of our hanger.
And so, the prepared horns and wood will now need to be connected. To do this, drill three holes in the horns at the base. Similar holes in diameter drill in the wood. They should be identical to be able to be made with screws or screws.
As you can see, the choice of wall hanger also has various options and combinations. Basically they will depend on the material of the product, its appearance and form, as well as various non-standard approaches to solving the issue. In any case, whatever of the presented options you have chosen, they can be beautifully embedded and enter into the interior of your hallway room.