I decided to add a little decoration to my kitchen, so far that I will do it - everything will be asked .. so that the shoemaker without boots))). We started a series of jars for different bulk: coffee, tea, grass ... and decided to make them in the "metal" edging, allegedly in silver))).
The method of decoration is not cunning, but maybe someone will come in handy ...
For such a decoration, I needed the following materials:
1.Bank glass;
2. Black paper;
3. PVA, waterproof varnish, acrylic varnish;
4. Share porcelain or ceraplast;
5. Black or acrylic;
6. Silver acryl paint;
7. Water, stacks, brushes, napkin threads (pep art), foam rubber.
The cap of the cans is also soaked and decorated with modeling.
We take the bank of an interesting form (with a lid) and wash it well, removing all stickers. On the dried bank, draw a sketch of our decoration with a glass marker (if anyone does not draw, can translate drawing). If there is a strong paint of black color (enamel or acrylate), then simply stain in the entire silhouette of the pattern (as in the photo) ... if not, then you get the silhouette of the black paper paper (as I had to). It is necessary in order to inside the bank there was a monophonic color.
Cooking Cold Porcelast, like me, or take a keraplastic (or any other self-sitting mass for modeling, except for salt test) and with the help of fantasy or pictures, hands and stacks I scratch the song you like right on the jar, lubricating the place of modeling PVA glue .. I'm in HF added instant coffee for color and I think that in such a color the jar can also be interesting.
My Cold Porcelain Recipe:
I make a very simple recipe, but it also does not always work good. But if he did not even work out - do not despair, it can be digested (if Zhidiy, then just do, if a tight, add Ch. L.Pva and peak to thickening). In general, so ... I take Art. A spoon with a top of starch (anyway what), a table with a spoon of soda, 2 tbsp. Spoons of PVA - I mix all this in a small cauldron and put on the smallest fire, if the pva is very thick - you can add a spoonful of water. It is necessary to interfere with constantly, it is preparing for a long time ... as soon as it starts to lag behind the walls and stick with a lump to a spoon - you can turn off the fire. Tap the sunflower oil on the table and take it into this oil to make a lump of HF, the hands are also a little lubricate the oil and smear the mass until it becomes homogeneous and elastic (do not be afraid to burn, in fact, the mass is not so hot). Before you make a jar with a sealed lid, in it you will store HF. Even if you want to do a lot of work, make HF with small portions, from storage in the refrigerator the mass becomes liquid ... I have just stored in a jar on the table and we use a mass in 2-3 days. If you want to make HF color, you can add instant coffee, cocoa, turmeric (dry additives only) in dry ingredients (dry additives only) or in the finished mass of oil paints.
The process of modeling Read more ...
I lubricate the plot of banks, where there will be leaves, forming a piece of HF into the shape of a sheet with your fingers and pressed on the glue. There is a leaf with fingers and stack of accomplishments. Large details of the pattern can be sculpt on the board, sweated by starch (so that the HF does not stick). Better first cut out the first layer of the drawing (leaves), for example, on one side of the can. Then we make a layer on the board and draw a basin, separating from the board with a stack, lubricate the place of gluing with water (not glue, and the wet tassel, if glue on the HF!), Cress and finalize the basket.
On both sides, the jacket decoration is different, between the parties I made gaps to determine the amount of product within the bank.
Lid also decorate the bindow ...
Curly belief mustes can be made of pep art nipened threads.
Now we take the acrylic paint of black color or black gouache mix with an acrylic varnish and a thin brush gently stain drying the drying.
Now we take acrylic paint "Dark Silver" (if you only have a bright, then in a separate small capacitance, you will split a light silver with a little black color ... Make quite a bit, so as not to dry out the unnecessary paint), apply a silver brush on a piece of foam rubber, rub Under paper, removing excess paint and carefully wipe all the carriage. For accuracy of work, take everything glass around the modeling paper scotch. Place the cap separately from the jar.
Now reach ... this is a lid ...
The second side ...
And already with the product ...
And the whole set of jars with products ...
Well, lid cans ...
