For one banta, you will need:
- 16 cm of white satin or repetitive ribbon 2,5 cm wide;
- 16 cm of purple repetitive or satin ribbon 2,5 cm wide;
- 8 cm of white satin or repusted ribbon 1 cm wide;
- line;
- scissors;
- candle or lighter;
- Termoklay;
- needle;
- threads;
- Rhinestones and middleings.
For one banta, two segments of tape 2.5 cm wide and 16 cm long. We connect two tape sections and fix the edges with a lighter, thus glue them.
© Photo Olga Slipchenko
© Photo Olga Slipchenko
We celebrate 1.5 cm and bend the tape.
© Photo Olga Slipchenko
We fold the second edge to the resulting mark. Cress your fingers formed looping.
© Photo Olga Slipchenko
Weells we add to the short edge of the tape, we get a triangle.
© Photo Olga Slipchenko
Align the long edge of the tape to the short and collect on the thread.
© Photo Olga Slipchenko
© Photo Olga Slipchenko
For the second side, the bow should be made longer than the other edge.
© Photo Olga Slipchenko
We fold the first half, deploy the long edge up and collect on the thread.
© Photo Olga Slipchenko
© Photo Olga Slipchenko
© Photo Olga Slipchenko
Tightly tighten and flashing with each other, fix the thread.
© Photo Olga Slipchenko
Next, we will need a ribbon 1 cm wide. 8 cm long ribbon capture a thermoclaim with a facial side of a bow.
© Photo Olga Slipchenko
Wrap off on the wrong, fix, and again fix the front side. So you need to wrap the bow. When we return to the involving side again, we draw a tape into the gum, we applied a drop of thermoclaus and fix the gum and tape, tightly pressed.
© Photo Olga Slipchenko
If the tape remains, carefully cut off the residue and fix the lighter.
© Photo Olga Slipchenko
A bow ready. The second bow is made similarly to the first.
© Photo Olga Slipchenko
Optionally, you can add a middle and rhinestones.
© Photo Olga Slipchenko
© Photo Olga Slipchenko
This is how very quickly you can diversify a boring tail or braid.