Women have long been "assigned" many elements of a male wardrobe. Is it possible to present a basic set of clothes for a lady of any age without trousers or jeans?
And not even very loved by men, but the accessory needed for business style is a tie, long loved to women-needlewomen. I just adore silk men's ties, I have their whole collection.
To make sure that the tie silk, we look at the tag, on which the inscription should be: Silk \ Seide \ Soie \ Seda \ Seta.
Although other ties are suitable for needlework: from polyester, viscose or wool, but silk are the most pleasant on tactile sensations.
For sewing the scene, we will need 3 tie. The main condition - so that they are combined in color scheme and fabric texture. Here, for example, one of the combinations, but I chose another option.
For men's ties, various types of silk are used, from rigid elastic fabric to a soft flowing. In this case, choose soft ties with a noble gloss.
In addition to ties, we need a sewing machine, scissors, sewing threads and a needle for manual sewing. A sewing mat is useful for cutting or a regular ruler, although you can do without them.
1. First, you need to neatly resort the tie, remove the sealing fabric from the inside - we do not need it.
If the tie is not new, then you need to wash the silk harvesting with a soft detergent, carefully squeeze in a towel and smooth iron, without waiting for the tissue drying.
2. Step two blanks with each other, folding the front sides inside. From the edge, we retreat approximately 0.5 - 0.6 cm. At the same time, the wide side of one of the ties and the narrow side of another tie fold in different directions.
Smooth seam iron.
We feed another tie with a narrow side to a wide face of a neighboring tie. Smoothed.
3. Since the tie has a specific shape, the workpiece turned out to be irregular shape, different widths on different sections. At the next stage, it is necessary to level the edges of the future scene, giving the pattern shape of the rectangle.
You can use a special substrate for cutting or draw the pattern with the help of a ruler and chalk. As an option - folded all the workpiece in half and cut off excess tissue along narrow sides.
4. We fold the resulting rectangle-blank along the long side face inside and drive along the edge into the pipe. At the same time, on both sides, we leave not fired edges by about 2 cm for turning the blank on the front side. At the beginning and end of the lines make the leaf.
5. Now we need to sew the narrow edges of the "pipes", for which we connect these edges as follows: pushing one edge inside the "pipes" so that at the second edge they coincided with the front side to each other.
Align, pick up with needles or make the mark, subsequently turn on the typewriter along the edge.
6. Through a small hole left, stretch the front side of the scene,
As a result, we will succeed in the front side of the pipe with a small hole, which is sewn by a secret shutter manually.
Ready!
Do not rush to throw silk trimming, they will be more useful for us! Next.