You have to place books, textbooks, magazines somewhere? The best solution to this problem is the original bookshelf with your own hands. It has several advantages at once: first, you will pick up the most convenient size of the product that perfectly fills the place in your home; Secondly, add a special thing to the interior; Thirdly, do not suffer much costs. As a rule, the shelves have an easy structure, and drawings, schemes and step-by-step descriptions of the work will help even the most inexperienced.
It can be a small hinged shelf, which not only allows you to conveniently arrange books, magazines, souvenirs, but also decorate the empty wall. If there is not enough space on it, then an unusual rack can be built from similar or different shelves, where there is also a place for souvenirs, photographs, small items.
Several modern bookpads, combined into a small rack, there is a place both in the living room and in the nursery.
To make a rack, you should prepare:
Phaneur. You can make from the materials you have (pieces of wood, chipboard, etc.).
Carpentry glue.
Clamps.
Electric drill.
Saws.
Emery paper.
Paint for wood (on your choice).
Varnish.
A simple scheme will help to understand the method of location of individual structural elements, their number.
The bookpin-rack consists of the following details that need to be cut from the material used:
16 elements of racks with parameters 250x250 mm (in scheme A);
4 shelves 1575x250 mm (on Scheme B);
1 backdrop 912,5x250 mm (on Scheme C);
4 base elements 125x250 mm (on the diagram D);
1 base 912,5x125 mm (on Scheme E).
Entry paper Treat places of cut and rough surfaces.
If you do exactly the same rack as in the photo, then all the details are 1575x250, 912,5x125 mm (designated in the diagram in and e) should be painted in a contrasting color. The remaining elements are covered with furniture varnish. Of course, the shelves can be made monochrome or use colors suitable to your interior.
We connect with the help of carbon glue parts 125x250 mm (e) pairwise (rack legs). Until complete drying, lock the parts by clamps. Glue, which performs on the seams, should immediately wipe it right so that the product is neat.
With the help of drill with self-draws (2 for each compound), set the transverse bar E which of the resulting supporting parts, pre-slipping the place of the joint with a joinery glue. Perform a connection by retreating from the edge of 10-15 mm, as shown in the photo. Such a location will give the bookshelf greater stability.
Spread pairs all parts 250x250 (a) forming vertical racks.
Drill on a self-tapping screw, missed the joints of the joint with glue, perform a P-shaped connection of two finished vertical racks and an element 912,5x250. This is the back (back) of the product.
It's time to collect 2 identical shelves, each with three transverse racks. First apply identical marking: 1 crossbar (double A) should be located exactly in the middle of the shelf (B), two others - on both sides of it, about 150 mm from the edges of the shelf. Then fasten the design on glue and screws. With the help of the kitchen, check the correctness of all the corners of the connections.
Now you can collect all the rack. At the same time, set the base, mark the contact location with the upper tier (with two compartments), then the shelf with the back, in completion - another double element. Press the entire design from above something heavy until complete drying.
Shelf-rack is ready. You can fill it with books, magazines at your discretion.
The use of furniture parts as a designer is not news. This method can be successfully applied by the example of the shelves. The idea is that from individual shelves of different sizes, a design is compiled - the rack installed on the floor or the wall in the appropriate form.
Over time, you can change the configuration of such a team furniture, as well as the number of its elements both in large and in a smaller side. MDF or DVP can be used as the main material for the shelves. The rear walls in the products are absent.
Before making a bookcover with your own hands, take care of the presence of the necessary tools. You will need:
A circular saw. It will come in handy if you yourself will take the mission of MDF (or chipboard) on the workpiece. It is better to contact the workshop with professional equipment, as well as the experience of doing such a job.
Drill with drills.
Iron.
Glue.
Sandpaper.
Knife.
Corolnic
For the manufacture of shelves on the wall, materials and fittings will be needed:
4 sheet of white MDF (if you use chipboard, then you will have to additionally acquire paint for finishing). From your material, cut the details with dimensions of 30x30 (20 pieces), 30x50 (10 pieces), 30x70 cm (10 pieces).
Saws.
Edge tape.
Plugs.
Staples for fastening shelves.
Embry the place of the details of the details emery.
Using the iron, close the places of the edge ribbon. Cut the knife unnecessary parts.
Put the markup for the holes so that the screws do not damage when screwing the structure of the material.
Drill billet holes. Self-plugs (pre-missing the place of fastening with glue) secure the boxes-shelves of two sizes of 5 pieces of each. Control so that all parts are connected at right angles.
Close the head of the screws with the shelves color plugs.
Depending on your needs, the area for the rack, fold the shelves in the desired design, one or more products - hang on the wall.
Create with furniture brackets the resulting design.
Make a shelf for books on the wall for books, not just useful, but also a bright, interesting, it is possible from girlfriend: chains, hemp rope, wooden dug, other things. Inadequate things will give the interior a special memorable character.
4 suites from natural wood 60x30 cm (you can take a chopped chipboard or MDF).
Hemp rope with a diameter of 2.5-3 cm.
Miscellaneous color. If there is only one in stock - you can cover pieces with a different amount of layers of veil or paint in paints into different colors.
Brackets with special hooks.
Anchor bolt to secure brackets to the ceiling or wall.
Electric drill.
Pencil.
Level.
Corolnic
Roulette.
Prepare boards: Sex the sandpaper their surface, grade sharp edges. If you apply a chipboard - take the place of the cut to the special ribbon for the edge.
Apply markup for the holes (the same on all 4 shelves) - 4 for each board. Follow the lines parallel to each side at a distance of 5 cm from it. The intersection points are drives of drilling.
Thick drill, not less than 15 mm, make through holes in the shelves. Similar drill in the center of each small height limiter. Wooden cubes, large beads or simply knots on the rope can also be used as limiters. The latter must be tied after the shelves and before the next.
Cut the rope into two equal parts.
Tie a strong bottom node. Gradually stretch the rope through the holes in the shelves. At the same time, it is necessary as limiters between the main elements, use the prepared bars of different colors and sizes. Carefully monitor the uniform arrangement of the shelves - so that there is no skew.
After rolling the shelves, check the reliability and parallelism of their location.
Connect the tops of both ropes to the brackets.
Anchor mount set where you are more convenient (in the ceiling or in the wall). Hang the shelf in place.
Despite the simplicity and ease of manufacture, such a mounted shelf, made using the use of primary materials, will become a worthy addition to the interior. It will help to use a free wall to accommodate favorite books, albums, magazines.
