When a gap appears between the bathroom and the wall, then some time later this may cause numerous problems. First of all, we are talking about flooding, as well as the growth of mold, which will inevitably begin. That is why it is very important to get rid of this problem on time. Consider the two most popular and optimal methods.
Method first: use sealant
A quick way to solve the problem.
The simplest and obvious thing to do with a hole between the bathroom and the wall is to eliminate it with the help of sealant. First you need to clean the work surface (clean the sides of the bathroom and the wall itself). To do this, first use simple water, then the degreasing composition and by itself thoroughly dry.
You can close over the sink immediately.
After that, set the tuba into the gun. Remember that the hole should always be a larger diameter than the gap that should be hidden. Starting isolation best from the edge. Squeeze the sealant so that it puts up as much as possible. The resulting roller should be carefully separated by a shovel, connecting edges with working surfaces. Before starting work, it is recommended to moisten the blade with soap solution.
Now it remains only to wait until the solution is dry out. When this happens, it should be removed.
The second method: use a ceramic border
Models with a corner look more beautiful.
It is best to solve the problem with the slit between the wall and the bathroom to use a ceramic border. This material differs from plastic with increased reliability and durability. It does not change the shape and shade over time, does not react to a junk and acid.
Beautiful and concise.
Installation work start with solvent surface treatment. When it dries, all the gaps are filled with sealant. When it is done, a ceramic corner is put. It is from him that all other elements of a ceramic border are glued. Attach the maximum effort to get a flat surface.
When you reach the second corner, you will need to trim the extension of the border. You can do this with the help of a grinder. Do not forget to clean the edges in this case. When all the laying is completed, the seams should be lost using sealant and tile grouts. At the final stage, it is necessary to remove all excess materials.