An extended sleeveless jacket will complement the image and make it more stylish. Jacket is spitting almost on any figure. The exception is only unsuccessfully selected length for women of low growth.
Pattern, sewing description and rear view:
You will need:
- Knitted cloth: width: 1.50 m; Length: 1.35; 1.35; 1.35; 1.40; 1.40 m.
- Threads in tone.
- Double needle for sewing machine.
- Plastic sewn button d = 16mm.
Step-by-step job description
I. Remove the details of the paper on paper. Be sure to specify the numbering of parts, all control marks, the direction of the equity thread.
II. Descript paper pattern on the fabric, as indicated on the layout plan, the fabric is doubled. Important: The direction of the equity thread on all parts should coincide with the direction of the tissue edge.
one. Details:
TA01 - Open-rized Detail of Property and Back - 1 Detail with Fig
Having independently clean the part at an angle of 450 without points on the seams:
TA02 - Kosy Beach for Processing Processing - 2 Details: Width: ZSM, Length: 46cm.
2. Cut the details of the Portnov chalk. Mark with chalk on the fabric all control marks and mid-details with a fold.
3. Mark the seams:
Power supply on all seams and cutting products - 1.5 cm
Punching for niza bending - 3 cm
four. Cut details.
III. Tailoring.
1. Before starting work, we recommend to familiarize yourself with the lessons 8.12, 27.42, 49 applications for the magazine, you will find a detailed description of all sewing operations.
2. Important: Product details from elastic fabrics are made by a special elastic line, or a narrow zigzag line. Punching on the bottom of the niza is to adjust the double needle.
3. Treat a bay bay prouchure. Tip: If the knitwear is thick, then the inner slice of oblique beaks can be spent and dangle to the product without bending.
4. Run the top of the top, and then the bottom sections of the product: bumps to unscrew to the wrong side, notify, root, pave a double finishing or zigzag knitted line on the front side of the product. Cut an excessive allowance from the wrong side close to the line.
5. Send the plastic button in the label 1.
A source