Returning jeans, stroke the pants, and then make longitudinal marking. For work you will need the same long stripes in width. The width of the blanks is equal to the double width of the finished stripes.
We value each of the strips from the sides to the center. If necessary, stroke to ensure better fixation.
For the base, choose a piece of dense tissue without seams. I turn over the stool and simply get it, and then cut out the basis.
Start work is better from the middle of any of the parties. The drawing of the finished canvase will be diagonally. To ensure this lay the first strip from the middle of the upper edge to the middle of the side.
We lay out the stripes so that the beginning of the interlacing coincides with the basis. Speakers will be cut off later. We lay the strips in a checker order. The edges are fixed between themselves, and then glue to the base.
After the laying on one side is over, we perform side trimming on one edge, and a little later on the second.
Now laying the strips is much easier. Cropped fragments can be used closer to the corners.
When the base is completely braided, check the tensile strength. If necessary, we admire the strip.
Turning the work face down, cut up too much. The future sidushka now looks interesting. It remains to add it edging.
We glue a long strip along the bend line. If necessary, increasing the length.
Then it remains only to be accepted once again.
To help those who are interested in creating a practical video secession below: