The result is very interesting, the variant of the pattern can be any. The picture from the Internet that is suitable for the interior, or a personal photo, the flight for fantasy is not limited :)
Refreshes the room if the entire tile is not yet changing the plans.
And you can do very quickly! This amount of work was performed in 4 hours with large breaks on the cross :))
Such 2 pieces 45x45cm
Such 1 piece of 4x (45x45)
What is needed for this:
Calem Glass 8 mm
Printed pictures (or illuminated or on self-tier)
primer
Tile glue
tools so that the tile will knock out (there was a hammer and type of spatula (only fat, I do not know what is called, I forgot to ask))
Work plan:
1 / We glue the pattern to the glass, or it is self-kept, or on a 2-sided transparent tape
2 / pour primer to the floor surface
3 / Making adhesive mortar and nastyko applied to the floor
4 / lay glass with a picture glued on it and tightly press to avoid air bubbles
5 / Pull the suture suture
6 / Leave a day to dry !!!! And so that no one has come for this time during this time !! And then we wipe / rubbed and admire !!!!
GOOD LUCK TO YOU!! (I admit that it was terrible to start, but it turned out much easier than thought!)