In winter, especially at the beginning of the period, when a minus temperature alternates with the positive, we face such an unpleasant phenomenon as ice. Unfortunately, it is not only unpleasant, but also quite dangerous.
Especially dangerous as a wilderness for children and the elderly. How to protect yourself and loved ones? Of course, the problem will help to solve non-slip shoes. A non-slip can make any pair! Moreover, one of the effective ways is available absolutely to everyone.
You will need:
- Super glue;
- shavings of sandpaper;
- paper;
- magnet
First you need to prepare the shoes itself. To do this, well and dry the sole, and also degrease it. For degreasing, alcohol or acetone can be used, as well as what contains, for example, a varnish removal fluid.
Now prepare the main anti-slip element - the emery chips. The fact is that in it, in addition to the abrasive, an iron chop also contains. Its necessary to remove it, because when in contact with water, iron will begin to rust, which means that the shoes will leave rusty divorces behind them. To clean the chips from the iron, take the magnet and collect the iron chips through the paper sheet. We do it until you completely get rid of it.
Now we take glue and apply it to the protector drawing of the sole, and then as it were to make a moq in chips. You need to apply glue and chips in stages, as the glue dries quickly. Gradually coated with glue and chips all soles. The remnants shake, ready!
This method works great, but it is easy to guess that it is possible to update this anti-slip coating periodically. On average it is enough for about 2 weeks.
And below you can watch the video on how to make shoes with a few with glue and sandpaper shavings.