How do it yourself make a coil for a garden hose from an old plastic bucket

Anonim

How do it yourself make a coil for a garden hose from an old plastic bucket

It is very bad when the garden hose is stored inappropriately. If you violate the rules of operation of this useful product, it will very quickly come into disrepair. In order for this not happened, it is necessary to organize a suitable protective coil on the site. If desired, you can make it with your own hands from a conventional plastic bucket.

What do you need : Plastic bucket (preferably from under the water ration), a piece of multilayer plywood (small), furniture handle, screws, steel balls.

Recommended tools : Electr Drill, Lobsika Saw, Roulette, Marker, Screwdriver.

We start with measurements. / Photo: YouTube.com.

We start with measurements.

So, the main thing that should immediately understand is the fact that the more our bucket, the room is the coil for the hose. First measure the dimensions, namely the greatest and smallest diameters, as well as the height of the bucket. All this shift to the surface of our multilayer plywood and armed with a jigsaw cut circles in size. They should work two - the smallest and largest.

Cut the details. / Photo: YouTube.com.

Cut the details.

The smallest plywood circle should freely go on the bottom of the bucket, while the largest plywood circle will close the coil. After laying the first circle, it is necessary to install a wooden timber in its center, place it, taking into account the thickness of plywood, and then trimmed under the size. When it will be done, it remains to drill the bottom inside the circuit of the perimeter and make holes under the fixing screws of the screws.

We prepare the central bar. / Photo: YouTube.com.

We prepare the central bar.

Installing ready-made bar strictly in the center and fix on screws and glue (if any). To the external plywood circle, kpripim on the screws handle. After that, we place a rectangle on the bucket and cut the hole in its place with a jigsaw. With the help of a feather drill, we make a hole in the plywood circle closer to the center. To facilitate the work of the coil, take out all the fillings from it and throw 8-10 metal balls on the bottom of the bucket.

We make a slot. / Photo: YouTube.com.

We make a slot.

All that remains now to do is to put the coil, and wind the hose.

We collect and ready. / Photo: YouTube.com.

We collect and ready.

Video

Read more