Any tool over time comes in disrepair. Wood-hacksaw is not at all an exception to this rule. The teeth are gradually stepping, and they can be broken at all. At some point, it may be necessary to carry out a procedure for the manufacture of new teeth on the saw blade. Make it is not so difficult, as it may seem at first glance.
What do you need : "Stapler", hammer, triangular file, Bulgarian, clamp, dense cardboard
1. What is "Stapler"
It is not difficult for our tool.
If desired, the tool for cutting teeth on the handbreak can be done at home in the workshop. The main node of the tool is a matrix with a triangular neck, resembling the shape of a saw tooth. Of course, I needed a punch that is part of the matrix that can turn around its axis. To adjust the height of the cut-out teeth into the tool, an adjustable stop is used, which shifts to the right or left. Its parameters are changing using several holes and fixation bolts.
Important : Matrix and Punson must go into each other with a minimal gap, and the working edges of both parts are obliged to be an angle of 90 degrees.
Make such anyone.
2. Cutting the teeth
We start cut.
"Stapler" for cutting teeth is an extremely simple tool. The work on cutting the new canvase with the removal of old tooth saws. You can do this with the help of a emery circle or a grinder. Before you start working with a "stapler", you first should reliably fix anything heavy in the workplace. Previously need to decide with the angle and the size of the teeth. After that, the canvas is installed between the matrix and the punch until it stops into the limiter. During cutting it, you need to hold one hand.
Then it will remain sharpened.
When everything is ready, it will stay to take a three-way file and sharpen new teeth. It is recommended to drop using emery one of the edges of the file, so that while working with the cannol, the finished teeth do not damage.
Council : Before working with a metal web, it is recommended to stretch out cut the teeth "staple" on a cardboard blank.