From time to time, the farming appears the need to trim a piece of bolt. Make it is not as easy as it may seem at first glance. In any case, if you do not know about the secret of trimming of hardware, which are used by experienced masters. In fact, everything can be done quickly and without unnecessary problems.
We celebrate the place of cut.
Imagine the situation: we have a very long bolt, which urgently needs to trim. For many owners, such a simple task will be a real challenge. Indeed, making circumcision of the bolt qualitatively and at the same time quickly is not so easy. In any case, if you do not know one reception of experienced masters, for the implementation of which you will need two nuts (should approach the cropped bolt), the marker, screwdriver and of course the metal hacksaw.
We put the nut right.
Immediately contact her second.
So, first of all, we note the place where we cut the bolt with the help of a marker or felt-meter. After that, screw the nut on the back to the designated line. When it is done, we take the second nut and use it in order to correct the first. Next, we take our bolt and insert it into the cartridge of the screwdriver instead of the bits.
We put the bolt in the screwdriver.
There is nothing left - armed with a hacksaw, put it on the edge of the nuts to the place where the pruning should be carried out. Tightly apply the tool and turn on the screwdriver. Just a couple of seconds and the bolt will be painted into two parts. Minimum effort, maximum efficiency.
Note : You may have to clean the irregularities and correct the thread.
Apply the hacksaw and turn on.
How to trim the bolt quickly and smooth: