The saucepan with a scolf is not necessarily sent to the scourge. Quite a bit effort, and it will turn into the right and practical fixture. Not good refinement will allow you to have your own small-sized smoking.
To implement the project you will need:
Old saucepan with lid
drill
8 long bolts with nuts with a diameter of 6 mm
stretching spring
fitting
a small piece of durable rope
2 hook
Old bowl, the diameter of which will be less diameter pot
Metal grille
Drill 4 pairs of holes in a saucepan and complement them with bolts.
Do not forget to tighten the bolts well.
We make a hole in the lid under the fitting, and then fasten it.
Fix at the ends of the stretching spring small pieces of rope, supplemented with hooks. Such a simple device will allow you to tightly fix the lid during smoking.
On the lower row of bolts acting as holders, put a bowl.
On the upper bolts are lattice. Skolnya is ready.
Then it remains only to pour small twigs or sawdust on the bottom and place a fat or other product for smoking on the lattice. After pre-wrapped with a cotton cloth or dense marks, you can make an additional filter, which will be a reliable protection against soot.
In order to shrink fat, it took only half an hour.
More details regarding the manufacture of homemade smokehouse in the video below:
Source ➝