An old and unnecessary canister can find many applications in the farm. Including from it you can do something really useful. For example, the old canister can be safely put on creating a convenient and practical drawer tools. Fortunately, this is not so difficult to do it, as it may seem at first glance.
Perform markup.
What do you need : screwdriver, 10 mm drill, Bulgarian with stone for metal, tape and marker.
The first and most important thing is that you need to do is put markings on the canister. It will be best to position the handle on the side face. The width of the handle will be approximately 5 millimeters. The height of the future box depends on the dimensions of the canister and can adjust the depth of trimming depending on the size of the tools that will be installed in it. So, if the tools are bulk, but light, then the drawer height is highly recommended to increase.
Drills holes.
Important : During the applying markup, it is very important to ensure that all tools have been placed in the generated gap between the box and the handle.
Now armed with a screwdriver and in places of rotation drill a 10 mm hole. They are exceptionally technological and needed because the Bulgarian disk will not be able to cut such steep angles. After this, we take it into the hands of the brandy actually and carry out the cutting on the markup. Nothing difficult, the main thing is not to forget about caution and safety technique.
Cut. .
Note : Do not forget to remove all suits after cutting.
Now it remains only to "reflect" the box. Wrap your handle with a tape, clean all roughness with a knife and a file. It will not be superfluous to build partitions and stand for some tools, such as screwdrivers. The detailed markup process, cutting and assembly can be seen in the video material.
Remove the canister.
Video
: