Shoes are not the cheapest thing in the wardrobe of every person. Even the acquisition of the most modest boot can significantly hit the wallet. The sadder, when something bad happens with shoes. Today we will talk about what to do if the heel with a rigid back saved in the boot. In fact, to eliminate such a problem, you can even on your own at home.
We disassemble the seam inside and remove a bad back.
When the heel saves in shoes, the foot ceases to be fixed. In such a situation, the stains begins to enjoy in different directions, which creates a logical discomfort. It happens when the hard back is broken or the heel grille breaks, after which it fails. Today we will talk directly about the back. The only way to solve the problem is to replace the element.
We smear a new leaf of glue and insert inside.
First check. Take shoes per heel and start pulling up and down. If at the same time a characteristic fold began to form in the back of the shoe, then the problem is in the back. This means that the boot should be disassembled. It is best to do this without touching the sole. It is best to disassemble shoes from the inside on the seam. So the easiest way.
Note: Hard backdrop is a detail of shoes that allows you to give the heel area the desired shape. It also serves as a transmitter of the load on the sole during walking.
We close the seam and everything looks like a new one.
Having done a hole on the seam of finishing material, we wake the fingers into the hole and carefully find the hard backdock, after which they also carefully remove it out. In his place you just need to put a new one. Before installing a new part, it is necessary to handle emery paper and flushing several times with shoe glue, dry and wash again, after which you can put a backdrop on the place. When installing, it should be carefully (as far as it is possible) to smooth your heel.