The first thing you need to understand is why wooden floors creak. In most cases, there is similar due to the deformation of the boards lying on the floor. For this reason, it does not matter - a new floor or old one. This may happen at any time. As a result, the sound of the violin is constantly "beats the ears" and annoying others. Another reason for the appearance of a syringe is the formation of cracks on the boards. Less popular reason is the formation of mold or fungi. What to do in such situations?
Unfortunately, the boards are spoiled.
Note : Also in some cases, the floor can creak immediately after laying. Most often this happens if the workers were made by errors.
The most reliable, however, the most time-consuming method of combating a creaking floor is the analysis of the entire floor and the coating reserver. Of course, it is possible to solve the problem of the screens and without such radical measures. However, for this, it will be necessary to accurately reliably establish the cause of the occurrence of unpleasant sounds.
You can make a slot.
So, if the cause of the violin is slots between the boards, then the question is solved by the method of close-up using a talc or a graphite powder. If the gap is large, then you can wove the rail with glue and install it there. The most simple and rapid way to eliminate the synthetic or linen cord is to resolve the synthetic or linen cord. For reliability, it should also be mounted with glue.
You can insert a cord or something similar.
If the cause of the screen becomes a loose locking of the boards, then they need to be fixed again. The easiest way to do is with the help of screws or nails. However, at first, each problem chalk will need to pushing something, putting something hard on it. In cases where the entire floor fails, the individual fasteners will not help. In such a situation, it is necessary to make flooring from plywood. Each sheet is attached to the floor with all the same screws or glue.
It is best to replace the problem elements.