Do you want to have a truly unusual and even amazing thing in your interior? Then arrow the materials and tools and make this designer table of infinity. Why infinity?
Because you won't find anyone where it begins, no where it ends - the real ribbon of Mebius, only in the square! Such a table will surely attract the attention of all your guests.
You will need:
Wooden boards;
glass;
Epoxy or plastic board;
adhesive for wood;
instruments
And the first thing you need to do is prepare materials, or rather the boards, from which your table of infinity will be collected. In our case, it is 12 44.5 cm boards and 6 boards - 39.5 cm.
This table looks like this table: on the entire perimeter it consists of one inseparable line. Chopsticks are marked by places of connecting boards.
To fasten the same boards with each other, it is necessary to prepare a special fastener, as well as correctly correct the boards themselves: make the basis for fastening and in them.
The connecting item looks like this. We need 6 pieces of such parts.
Now we collect part of the parts from the boards, the joints of the joints are processing glue and only after that we connect them between themselves, inserting the grooves into each other. In order to make sure that the order of the "groove lock" is not blocked. At this stage, 2 parts with 4 sides, 2 with 2 and 2 with 3 will be most convenient.
The next day, when the blanks are precisely dried, connect them with each other with glue. Carefully make sure that all the angles are strictly equal to 90 degrees. For better stability, it is worth fastening elements from epoxy resin or plastic on the lower corners. They will add table not only stability, but also originality.
Finally, on the upper side boards, in which the preliminary drank is made, install the glass. Table of infinity is ready!
And below you can see a detailed video on how to make this original table with your own hands.