The knife handle - the product is not eternal. Sooner or later it comes into disrepair. It will be impossible to use the knife after its breakdown. In such a situation, it remains or throwing a precious tool, or try to implement the restoration. First of all, it is necessary to prepare materials and tools for the creative process. When everything is ready, we take for the recovery of the handle.
Need traffic jams.
What will take: Nut M6, Stud M6, Solid wood bar, acetone, epoxy glue, cyanacrylate adhesive for flexible compounds, drainage glue, sandpaper P36 paper, corks from wine or champagne (10-12 pcs).
Making pruning.
First of all the traffic jams need to be aligned. For this, they are heated in a microwave oven for 1 minute. This will be enough in order to return to them the original appearance. Next, the plugs are cut along one side plate, after which you can move to their grinding on large emery paper P36.
First, here are such blanks.
Cutting and polishing 2 tubes, we welt their side with glue. We do a pause and wait until the solvent evaporates, after which we combine the blanks. They must keep tightly among themselves. After you cut off the two formed wide sidewalls in traffic jams, we get a set plate of all these actions. These need to be made from the plugs of 4-6 pieces. You also need to cut the combaster and a knife grinding from the tree.
These are such things.
Collect the blanks in the handle will help the glue and the shank with carvings. Each element is recommended to oboxide with epoxy glue on the joints. The handle is collected in one whole and (if necessary) is fixed by bolts.
A great solution will be.
After that, it is necessary to carry out plotting of traffic jams and grinding the handle. When it becomes a circular, coating it with a mixture of 50 parts of acetone and 1 of the cyanacrylate glue. The impregnation is applied several times with a pause of 15 minutes.
It turns out like this.