For the box, we will need:
- box (desired size), better with a lid from above, like a mail box
- Yellow fleece for the inside of the casket
- a little white and yellow yarn for a chamomile needle and suitable for this yarn hook
- a little bit in needle
- 50 g Motok green yarn grass (ate a box is very big, it might need more) and suitable spokes (I take no number 4)
- Bilateral scotch (better than sewn), instead of a tape can be used pencil glue, or any adhesive convenient for you.
Well, the small things are necessary for work:
Portnovskiy chalk or washes marker for fabric, pins, sewing needle and yellow, sewing thread, scissors, centimeter or ruler
1. Cooking a box . For the postal you need to cut off the extra parts, leaving only the lid on top, without additional protrusions and stars. For a box without a lid or with a separate lid - it can be glued with a wide scotch with both sides.
2. Measure your box . We need the length, width:
The depth and size of the box around, which includes a sidewall, bottom, sidewall, lid (on the second photo) -
3.. Fleece inside . According to the resulting dimensions, the disappearing marker on the flies is a blank (where the arrows add to half a centimeter in order to be conveniently beaten then the fleece on flights) and cut out, if you wish, you can sew flies pockets.
four. External green part . On the same sizes and the same shape, knit facial stroke from the grass was a green outside of the casket.
To do this, I type a loop, applying them to the long side of the box, when the number of loops is sufficient, freely knitting, alternating facial rows with an invalible. Periodically, I apply to the box, because due to the fact that the knitted canvas strongly stretches, more reliably approximately to the box than measuring centimeter.
When the long rectangular part is ready, I close the loop, depart from one edge distance equal to the depth of the box, and type the loop on the side side (the length should turn out as the length of the smaller side of the box). It is necessary to closely monitor the facial side of the sidewalls coincided with the front side of the main part. Close loops.
Similarly, tie the second sidewall.
If it is more convenient for you - you can associate such a crochet billet, though the yarns will go much more.
5. Printed Fleece. To do this, we glue the entire inside of the box with double-sided tape or smear uniformly glue - do not forget about the bottom, four side sides from the inside and the cover from the inside. It is more convenient for me to first glue the inner part, and then the lid. Watch that the joints of the sides are neat and without cracks.
6.. We select a button, make a loop, knit the chamomile needle.
For one of your casket, I picked up a wooden button, for a different buttons knit (two dense mug, stitched through the edge).
For the loop, I twisted the laughs from white yarn, you can simply make out of thick yarn or gum or tie a chain of air loops.
Chamomile I knit acrylic 300m / 100g crochet number 1.5
Legend:
VP - air loop,
BTB - a column without Nakid
Pr - Add - in one next loop tie 2 fails
UB - Refuge - Two ISS
SSN - Column with Nakud
Mon - semi-saline with Nakud
SS - connecting column (he is a semi-roll without a nakida)
_____________________________________________________________________________
We knit just on the helix, without lifting loops, the front side is out.
We begin with yellow yarn:
one - 2 VP, 7 ISBI in the second loop
2 - 7 pr (14)
3 - (1 fail, etc.) 7 times (21)
four - (2 fails, pr) 7 times (28)
5 - 6. - 28 BTF (2 rows)
7 - (2 fails, UB) 7 times (21) + 1 fail-on, on which we change the color of the thread on white
Yellow thread can be cut down, then we will continue to knit white petals
eight - (SS, 7 VP, starting with the second VP 6 ISP on the VP, 2 ss in the following 2 yellow loops) 7 times
nine - [ON one loop, 2 ss, 2 failures, mon,
To the next loop to check at the same time (SSN, VP, SSN, VP)
In the messed on the tip of the loop to check: (SSN, VP) 3 times
In the next loop to check (SSN, VP, SSN)
Further one post in one loop:
Mon, 2 BB, 2 ss, 1 loop skip, 1 ss] Repeat all this part 7 times
To break the thread, you can immediately leave the tail to the sewing of the chamomile to the box.
Fill the yellow part of the chamomile with a synthetic packing.
7. We glue the green outer part. An invalid more fluffy side outwards.
Button buttons, looping, needle, can certainly sew until the start of gluing, but then you need to calculate where exactly it is to do, and still there is a chance that during gluing something in some side will pull out and the button will not be in the middle and chamomile Not where I would like.
Put the bottom and small sides, we glue the green top, then we glue the back sidewall, stick the greens.
If it is glued not good enough - not scary!
We still will still sew everything, the main thing is that the green top is not
Eruzal and stretched less evenly.
Now we already determine where the middle of the remaining
Front sidewalls, and sew a button in there.
With ancient buttons, we stick the sidewall.
We glue the loop rope on the top of the cover (in the middle! Opposite the buttons! Check out several times, right next to the buttons and it pulls out the loop to buttons when the box is closed)
Now you can enclose the top cover with a scotch, and to the upper green part to sew chamomile:
We glue the remaining top.
8. Sew green sides and yellow part with green.
First, a thin green thread in the color of the grass is sewn with small stitches through the edge of green sides among themselves, and then sewing yellow thread sew a secret seam yellow part with green:
Voila! Romashkaya Casket is ready!
Now it can be thrown away with any useful need or to give someone.
A source