I decided to make a tray and basket for bread from the paper vine. It turned out very useful for any bumps of things.
Stepitary Production Basket for Bread
one . The bottom of the bread baskets performed from the corrugated cardboard, pre-strengthening it with wooden spanks. To do this, they made them along the web through the holes in the layers of the blank at a distance of approximately 5-7 cm. For a tray saw parts from Feds.
2. . The bottom of each product collected from two identical billets glued together to titanium, and between them the ends of the tubes were fixed.
3. . We started with a rope of three tubes (photo 1). Then the tips cut off, sinked and hid (photo 2) Spit fleck from racks (photo 3)
four. He traded the tubule using the skewers (this is much easier than to drag the tube itself without it). To do this, first inserted into the right seat on the basket. The sapeter was then put on her tube and stretched together (photo 4) then brought the rack again, bending each in front of the two next, in the place of the previous one (photo 5). She finished braid braid (photo 6-8)
On a note
If the tubes begin to push and lose plasticity - slightly spray them with water from the sprayer.
five . As decoration, I decided to stick decorative beads, placing them on the short sides of the product. The decor from the remnants of the wallpaper. For this, the triangles were cut with a base of 1 cm and the sides of about 15 cm. Screwd each billet on the knit number 5, to easily rinse on the racks. Fixed to Titan (photo 9) dried, painted with a veil into the desired color (photo 10) the finished elements on the racks in the process of weaving before performing the braid (photo 11).
6. . On the bottom inside and outside the decoupage of the bright napkin. Covered with aqualak. Accessories are ready!
