In the design of the hammer, invented in the prehistoric era, little has changed in the past century. Instead of a piece of stone tied to a stick, forged heads and ergonomic handles are now used, but the essence remains the same: Bay, and you will achieve your own. As you need a hammer to apply in this particular situation, depends on the material by which you beat, and From the goal that needs to be achieved.
We will tell about the various types of hammers and, under what circumstances each of them should be used.
Nail-breeder: the most common type of hammer, weighing from 450 to 680 grams. The claw usually has a notch that is used to pull out nails from wood.
Auto mechanic hammer: weighing about 400 grams, the hammer is designed to remove dents on car panels
Hammer travel trachor: well suited to clog big bolts. Weighs approximately 1.2 kilograms.
Finishing hammer: Designed specifically in order to form metal decorations. Weigh about 200 grams.
Titanium hammer: made of titanium hammer with a rubber handle to extract the most stubborn nails. There are about 1 kilogram.
All-metal hammer: Its whole design from wrought steel withstands heavy loads. Designed for plumbing and carpentry work. Weighs from 400 to 900 grams.
Welder hammer: At first glance, a rather strange looking handle of a welding hammer goes well into the hand and dispels warm. Weight about 0.5 kilograms.
Round Paine: It is sometimes called engineering hammer. It is used to give a shape metal, closure rivets rounding edges from metal fonts. The weight of Bolfi varies from 55 to 165 grams.
Tin hammer: Created to process parts from sheet metal during roofing works and tin works. Weighs approximately 0.9 kilograms.
Gaulogest hammer: on the one hand, this is an ax for a fragment of rocks of the rock. Flat head is designed to destroy small rocks. Masonry with this hammer is released in a brick laying of the seams. His weight is 1 kilogram.
a source