In this case, the easiest way to buy the desired metrah or pick up another pattern. But, hunting in the forest of captivity! So, we will look for a solution. Of course, it is not always possible, but we will try to "save" on the fabric on the example of the pattern of light blouses with the Basque, model 118 from Burda 6/2017.
So, the Metage declared in the journal is 1.5 m with a width of 120 cm. Even with the most compact placement of all parts of the pattern on the fabric, the latter will need no less than one meter taking into account the allowances.
In the present master class, a piece of silk chiffon is 0.7 m with a width of 130 cm.
You will need:
✂ tracing;✂ Scissors for Sheocha;
✂ Portnovsky chalk;
✂ line;
✂ centimeter tape;
✂ marker;
✂ needle and threads for sewing;
✂ thin, low-temperature fluzeline on a tissue basis;
✂ Portnovo pins for Silka
Step 1. Adjustment of the shoulder seam
On the details of the backrest of the shoulder seam shifted in such a way that the illusion of the coquette is created in front of the blouse. You can transfer this part to the shelf.
Transfer to the tracker the contours of the back of the back from the shoulder seam up.
Cut.
Step 2.
Remove part of the back detail exactly along the line of the shoulder seam and move the pattern on the fabric, folded in half the face. Cut.
Step 3.
Plicit on the fabric, folded in half the face inside, the shelf item along with a small part of the back (step 1), aligning them with each other. Cut.
Step 4. Basic Size Adjustment
The size of one Detail of the BURDA pattern is 1 m x 24 cm. It is on the Basque and you can "save".
From the remaining piece of chiffon, it is necessary to cut the one-piece basket for the entire length, in this case 130 cm. But at the same time, the height of the Baska can be increased as far as the tissue residue allows.
Since the Detail of the Basque is rectangular, we cut it on a string.
How exactly cut the fabric: master class
One-piece Detail Basks Stop in the ring.
Step 5. Cross Front
Instead of the original cut of the neck, you can make a straight cut and handle it with a cleaning, bar or oblique baker.
Seam the line of the middle of the shelf fold line.
Cut from chiffon with a wrapper - a strip of a width of 4 cm. And also a bandwidth of 2 cm from thin low-temperature fluzeline on a tissue basis.
Run the flusline strip along the middle line of the shelf from the wrong side.
Fold the wrapper with the shelf facelight to each other, aligning the line of the middle of the details. Note the slap to the shelf.
Discharge the bathing along the middle line of 3-5 mm from it.
Portnovo scissors for Silka perform a cut.
Punches in the corners Appeem to the ends of the lines, not reaching them 1 mm.
The edges of the wrapper start up.
Help the wrapper on the wrong side and notify in the edge.
Open slots Windscrew inward and notify.
Cutting down to the edge.
Restore.
Step 6.
Still side and shoulder flaw stamps by French seam.
Step 7.
On both sides on the whole-circuit Basque, mark the middle of the details.Step 8.
At the bottom of the shelf and backrest blouses also mark the middle.
Step 9. Touch the Basque to Blouse
In this case, the Basque can be seen in different ways.Stay on one oncoming fold in front and rear on the difference between the length of the basket and the lower slice of the blouse. To brake the Detail of a Blouse with a blouse by aligning the side of the side seams, along the line of the middle of the transfer and back. Start.
Stay a few shallow folds on the bask to the length of the lower blouses. To clamp a basket with a blouse by aligning the labels on the side seams, along the line of the middle of the transfer and back. Start.
Or give the Detail of the Basque.
In the upper edge of the Basket, launch two parallel lines with a maximum stitch length, retreating from a slice of 0.7 cm and 1.5 cm, respectively.
Scaliate a basket with a blouse by aligning a side seam mark, along the line of the middle of the transfer and backs. And give up a bask to the length of the lower cutting of the blouse.
Cut the basket to the bottom slice of the blouse. SWA LOCKS WATCHED UP.
Step 10.
Open SCREEN Baskets Treat the role-playing seam on overlock or narrow zigzag lines on the sewing machine.Step 11.
From the remnants of a silk chiffon, pick up oblique places.
How to carve out oblique fabric racks: master class
You will finish the faces of the breakdown and the neck of the blouses one of the way you are able to see the sinking faces: 3 ways to seize.
Ready!
