In fact, together with the purchase of components, it took a little more than in the title, but not much
The task has arisen urgently to find a table for a laptop, so that you can use it in bed. On Sunday about 18-00. Time for everything about everything about two hours. You can, of course, more, but it is very desirable to meet on time. Take a taxi and start to fly shopping, parallel calling of potential owners was not crowned with success, in stores empty
There are thoughts attend the minds to try to collect the necessary device "from the primary materials". Unfortunately, there is nothing at hand, which means we are going to a construction hypermarket where not so long ago, blanks for shelves made of laminated chipboard with a treated edge and a variety of sizes were noticed.
The plan is approximately like this:
- Take three shelves. more - countertop, smaller - legs
- several door loops, because the table is preferably folding
- A couple of bars who will limit the rotation of the legs in the "decomposed state" not letting them turn out.
Shelves were found, loops, too, in place are trying to estimate what ... the future confidence construction does not inspire. And here, about a miracle, there are wonderful wall-mounted folding attachments for these pins! With the lock!
Solved, they use them!
So, the kit is purchased and delivered home. Here on its assembly and will need about 15 minutes.
Shelf 60 × 40, two shelves 40 × 31, three dozen screws 4 × 16 and four wonderful mounts. The total cost of ~ $ 20, of which the fasteners went a little more than half.
The very "wonderful" mount. Next I will call them "loops", it is painfully similar, and how they are called in fact I do not know: ")
Actually the lock that will not allow the legs during operation. Now the "loop" is semi-open and not yet fixed:
Lock in working position:
So, proceed to the assembly. To begin with, add everything to a bunch To approximately imagine that we will turn out in the end:
Not a hurricane, but I am not a professional dad Carlo: ")
The legs are 31cm high, if we fold them will not fit without the admission to those available 60cm (the width of the tabletop), then we will fix them so that at the opening it is not under, but to the left and right of it, then the folded legs will be parallel plane Countertops, so it should be more convenient to store it and transport it. Naturally, when folding, they will hang around on the left and right, but otherwise they would have to saw them, which means to get a pair of untreated edges.
Next, using a credit card as a template (and I didn't turn out to be a line with my hand) exhibit the hinges on the table top carefully and weak the place of fastening with screws. In the difference from the line, the screwdriver, and according to co-investment and drill, I was found - drilling a thin drill hole for the screws.
We screw the mount with the tabletop, apply the legs and place the place of attachment on them. Repeat drilling and screwing procedure.
Return like this:
Drink the second "leg":
I turn over! Table ready!
And it can be folded
Complaints about the fact that he did not enter the dimensions to the hospital bed did not come, it means that the mission can be considered completed successfully
A source