Good healthy and wonderful mood. I want to share with you today the idea of making the shelves for shoes, with your own hands.
The shelf under shoes is the necessary attribute of the hallway, because thanks to it the space is released, and the room looks neat. It is not difficult to buy in the store, but a small simple design is expensive. If there is a desire and fantasy, then figure out how to make a shelf for shoes with your own hands, just. We can serve as laminate panels, boards, plywood, chipboard. I used in the manufacture of your chipboard. But I didn't have enough enough, so I used the MDF for 2 parts, they are similar and in structure too. I have a fantasy and ability, you can make furniture that you will not find in the store. You already know what you want to see In his apartment, a thing that harmonizes the rest of the hallway furniture ...
So, let's begin! For this we will need:
chipboard itself, and fiberboard for the rear wall shelves,
el.lobzik, el.del, rolled on a tree;
See Falet or Roulette, Pencil, Rule;
Roll itself adhesive tape,
screwdriver, small screws more than 20 pieces, for fastening the back wall of our shelf;
Furniture screws, only not 8 pieces, and 12pcs. So, as I decided to fix the additional partition inside the shelf, for strength (suddenly some of the guests decide to sit down!) And it will be more convenient for grandchildren.
Hex key for furniture screws.
As well as rollers - 4pcs. This is for convenience when washing the floors, glowing the shelf aside and washed under it.
And now we went further ...
Lobzik drink five parts of the shelf, (see the sizes in the photo), you can take other sizes for yourself as convenient for you.
We make all the details of the film.
We make a spinning on the side parts of the details, for drilling holes in which the furniture screw, connecting everything
Details of the shelf.
Tree drill I took number 5
Insert the drill to the drill, fix it
and fix the key. (He is always near me, fixed by the tape to the wires of the drill)
Drill holes over our labels and hex key screwed furniture screws.
After the box we have been assembled, we cut the rear wall of the WHP shelves from its size, look with a film inner side and crepaim it with small self-draws to the back of our shelf. And in the middle, we note the stroke line along which the filling of fiberboard, small screws, to secure the rear wall of the shelf with the inner partition of the shelf.
Memid see the middle of the shelves, make a pencil mark, install the partition in-inside the shelf, exactly along the line and drilling
Two more holes on top, screw the screws.
With the bottom of the shelf, we do the same.
In my package there are such rims for furniture, I never throw anything ...
They, I close the ships of the screws.
So it is more beautiful, isn't it?!
The shelf flipping and screwing the wheels to the rod of the shelves.
I wipe the shelf with a damp cloth from all sides and inside ...
And I install on my place in the hallway.
Where she will be very good to fit into the interior of my hallway.
Each thing made with your own hands carries not only a practical function, it fills the house with a special comfort, because it is made with love and especially for this place.
Well, now everything is what I wanted to share with you
A source