Easy and fast way to create fringe
In addition, the fringe can also be used in the small needlework - the manufacture of toys, clothes for dolls and other interesting things.
To quickly create a fringe, we will use: yarn of the desired color and composition, a cardboard roll (you can glue with each other toilet rolls), tissue tape (rolled leucoplasty is also perfect for), scissors, and threads.
For firmware we will use a sewing machine.
The diameter of the cardboard cylinder will determine how long the filaments are frozen. If the cylinder in diameter reaches 5 cm, then the length of the thread will be approximately 7-8 cm.
So, fasten the tip of the yarn - we glue it with the plaster to the edge of the roll. We start winding the thread around the roll. We do this without tightening the yarn, otherwise it will be difficult to remove it from the cylinder. Domota Rutch until the second end of the roll, cut off the yarn and fix its tip - attach to the cardboard. Now we cut off the plaster of the desired length and glue it along the entire length of the roll across the thread.
Gently remove the wound threads together with the plaster with the cylinder. It turns out such a "snake." Bend twice the tissue tape over its entire length. Putting it in the middle of Scotch, we spend it on the machine. Thus, all threads are securely attached to a tissue basis. Even if with time glue will lose its properties, the threads will still be kept in the form of fringe. This is the easiest advice, how to make a fringe with your own hands. It remains quite a bit - to attach a fringe.