In order not to buy expensive furniture, you can build yourself a dressing room, if, of course, you have a storage room or in the hallway enough free space. In this case, it will be described how to make a dressing room with your own hands in the storage room.
In the dressing room there will be hinged holders, hinged shelves, designed for hats, drawers for linen, shoes and clothing shelves, as well as some reinforced shelves on which canning cans can be stored. In addition, there will be autonomous light in the dressing room, and it will be separated from the hallway with sliding doors.
How to make a dressing room with your own hands?
For self-making a dressing room you need the following tools: a drill with a perforator, a saw or electric logs, drills on a tree and concrete, a stoveth of a flat, planer, knife jamb, crusades, pencil, roulette, sandpaper, PVA and the kitty. Material that will be needed for a dressing room: Plasaries planed pine thick 20 mm thick and as wide as possible, wooden bars 45 × 45 mm, plywood 8 mm thick, pine furniture shield, from which the facades of drawers will be made, aluminum corners (25 × 25 mm - half meter, 40 × 40 - two meters), handles for boxes, metal plates (200 × 60 - four pieces), selflessness (20 mm - 50 pieces, 40 mm - 300 pieces), retractable mechanisms.
Before being made for the manufacture, you need to draw a detailed drawing. First you need to build on the wall on both sides from the bars something like stairs, which will be holders for shelves.
The connections must be made "in the paw" and for greater strength to fasten with self-draws and glue.
Two such "stairs" must be attached opposite each other to the wall. Next, starting from below, boards are stacked on transverse bars. Solid make the first and fourth shelf from below, and the second and third must be divided in the middle of the plywood so that in the left half of the drawers to make drawers, and right to leave for open shelves.
Retractable boxes are easily assembled from boards, and plywood is used as the bottom.
The furniture shield, cut in size, is attached to the outer part of the box, and then the retractable mechanism and handles are attached.
The lower open shelves are attached on one side to the bars, and on the other hand to the corners screwed to the plywood.
Next, you can start using the hanging shelves to the right and left, which are attached to the wall using an aluminum corner, and to the linen shelves - metal plates.
To the bottom of the hanging shelves, you need to attach brackets for chrome pipes that will perform the function of the hinged holder.
That's all. Now the dressing room is done with your own hands! If everything was done carefully, it is able to serve you for many years.
A source