Buff is a small knitted scarf type of slander. Sew it with your own hands is quite simple.
Buff is a multifunctional thing. You can wear this scarf-ring type, you can, curtailing several times, use as a hair bandage. You can wear it, closing the nose and mouth - so Buff becomes like a face mask. Of course, it will not be replaced with a fully Buff of a medical mask, but if there are no masks, then such protection will be better than nothing. If it is planned to use a buff in this way, it is better to sew it from not too thick cotton knitwear and remember that we can carry such a "mask" in order to protect against viral infections, you can 2-3 hours, and then you need to wash it.
Buff can be sewed on overlock or on a sewing machine, Switch Zigag.
You will need:
- knitwear (flap with a size of a maximum of 60x60 cm);
- cloth scissors;
- chalk;
- line;
- Portnovsky pins;
- needle for manual sewing;
- sewing machine or overlock and thread;
- Iron.
STEP 1
First you need to determine the size of the Buff details. The easiest way: taking the flap of your knitwear, wrap it around the face, capturing his nose. Connect the cloth in the nape area and stretch slightly. It is necessary that you may be comfortable, but at the same time the material did not fall from the face. Then - remove the flap and measure the resulting length. This is usually 45-55 cm, it is better to measure individually. Add 1.5-2 cm to fishery freedom. The resulting value is the width of the Buffa details. The length in our model is equal to the width: the square item turns out. On all parties, add an input width of 0.7-1 cm. Put the part from the web.
Step 2.
Please note: you can sew a buff so that the share (its direction in the knitwear indicates the posts from the looping) in the finished thing will be directed vertically or horizontally. It makes sense to choose the second option if your knitwear after stretching is badly returned to the original state and, therefore, in the process of socks, the scarf can stretch. Usually, the knitwear preserves the form when stretching through the duck, and the buff, which is crosslinked in this way, will stretch less.
Fold the detail in half the front side inside. If you sew a buff from which the share will be vertically, in this step, connect the sides parallel to the duck direction. If you need a buff in which the share will go horizontally, connect the sides parallel to the equity. Scoop edges with pins.
Sew the detail by Zigzag or Overlock.
Mustive seam.
Squeeze the allowance to one of the sides.
Step 3.
Hold half the buff in the face to face.
Align the seams.
Align the edges and scalp pins.
Machine seam, stepping edges. Leave an opening for turning a width of 10 cm. If you have a zigzag on the machine, the leaf at the beginning and the end of the seam is better not to do, and then pull the threads, tie the nodules and trim.
Mustive seam.
Step 4.
Remove the buff through the hole.
Putting in the hole in the hole area, wrapped in one direction, and start it. Hole squeeze manually.
It is better to sew not a secret seam, but with small neat stitches through the edge: so seam will be more durable and elastic. Secure and cut the thread and remove the buff so that the sewing hole is inside. Ready.