In this master class, we will demonstrate you, as you can make a medallion with your own hands from the coin. Knowing the principle of manufacture, you can do both on your own sketches.
Materials
To work, you will need to cook:
- coin;
- chain in a coin tone;
- connecting rings, 6 mm;
- barrel-shaped fastener;
- a small saw for the manufacture of jewelry;
- Dremel;
- paper emery;
- bits and drills 0.5 mm;
- Printer.
Step 1 . In the program "Photoshop" you need to make a coulon pattern that you will cut out of the coin. In this case, the contour image of the dog's head was harvested. And in it with a simple brush made cuts. It is important in this work so that the internal slots be smooth, without sharp corners and sharp germs. Otherwise, cutout will be difficult to do.
At the top of the coulon, do not forget to make a mount under the connecting ring. It also place in the form of a ring.
Step 2. . Transfer the image to the A4 sheet. Scaling it to the size of the coin and send it to print
Step 3. . Cut the template.
Step 4. . Take glue and glue the image to a predetermined coin.
Step 5. . Take a piece of plywood. Make a triangular cut in it. Place the coins on it so that the template is exactly in the neckline. Create the design with visets or clamp.
Step 6. . In each, take a point for holes. Make them.
Step 7. . By inserting the jewelry saw into the holes, make cutouts.
Step 8. . After cutting the pendant over the external contour. Do not change the procedure in places. If you first cut the pendant on an external contour, keep it for you not for.
Step 9. . Using sandpaper, pollute the workpiece from all sides.
Step 10. . Measure the length of the chain. Divide it into two parts. On the one hand, attach the elements of the barrel-shaped fastener, with another coupling ring for hanging the coil.
Step 11. . Secure the pendant on the connecting ring.
Step 12. . Polish the pendant and chain.
Ready!