Very simple! Even those who did not hold in the life of the hammer in their hands in their hands. A few hours of work, and in your house there will be a stylish cabinet from the cover of a fashionable design magazine.
You can clearly follow our instructions, but you can choose your sizes, add more shelves, hooks, and even hang on the door loop for the closet. True, it will be a completely different model!
In order to make a wardrobe with their own hands, it will be necessary.
Order Plywood plywood 2 cm thick:
- 50 cm x 180 cm - for lateral walls - 2 parts;
- 50 cm x 90 cm - for shelves, top and bottom - 3 parts;
- 30 cm x 180 cm - for the rear wall - 1 part;
Instruments:
- Copper or chrome pipe;
- Self-tapping screw;
- Round mirror with a diameter of 20 cm (optional);
- Truborez (or ask to trim the pipe immediately in the store);
- Electric drill and drill;
- grinding machine or sandpaper;
- screwdriver;
- Construction roulette;
- Line.
Make the cabinet do it yourself
As usual, we recommend not to bother with independent opening parts, but simply buy a sheet of plywood 2 cm thick in a construction supermarket and immediately ask him to cut down the dimensions we need. The only thing that should be done when you bring carved details home is well cleaned by their sandpaper or grinding machine, if any.
Time!
On the side parts from the bottom edge, measure 2.5 cm up and swipe the horizontal line - there will be a bottom item, the bottom of the cabinet. Meach another 50 cm up and read another horizontal line - there will be a cabinet shelf. In principle, the height of the shelf can choose their own.
On the same side parts, measure 12 cm from the top edge and spend the third line - at this level there will be a crossbar for the shoulders. Find the center of the line and mark it with a cross - here you need to drill a hole in which the pipe is tight.
Check again if you have duplicated all the marks on both side parts: there should be no extinguishes!
Drills a hole for a pipe in one side part, put the second under it, we circle a pencil, drilling in the second.
Two!
We collect the whole cabinet. At first to one side part we attach the upper, middle and lower shelves. After making sure that everything is in their places, attach the second side part, and at the end and rear.
It is better to first drill thin holes, and then it is already planted for a self-tapping screw. And do not drive the screws to the end until you make sure that everything is in place.
Three!
Insert the pipe into the holes, cut it to the desired level, taking into account whether you want to use it also as an external hook. You can glue the mirror on the back or, for example, on the side wall. If you wish, you can make additional hooks outside or inside the cabinet, for example, for belts and scarves.
How to paint a wardrobe: 3 advice from BELINKA
- Get the perfectly smooth wooden surface without changing the color - exactly as in the photo - you can use the oil for wood. Apply oil to the surface so that it is a bit more than necessary, wait for 15-20 minutes, wipe out the surplus. If you use butter with wax, do not forget to pre-primed the surface of the so-called oil for surfaces in contact with food.
Want to turn an inexpensive light tree into a noble "rosewood" or "Eben" - use the azure on the water-based BELINKA INTERIER of the desired shade. Apply the azure with a tassel, wait 3-4 hours, apply the second layer.
If you decide to give a closet bright overlapping color, use paint for wood. You can paint up immediately and wooden, and metal parts of one paint can be used by the enamel BELINKA Universal.
Ready!
