Whatever was in your home beautiful and comfortable furniture, the day will come when you will understand that your fifth point is no longer so nice to sit on the kitchen chairs, as before. Unchanging food satellites - oil spots, fat, juices and tomato paste will certainly be sooner or later on the seats (especially if you have little children). And the failed sids will remind you that in a cozy home it's time to change something. In this article we will tell you in detail how to update the old furniture by making a chairs. Please note that not every fabric is suitable for drying. The choice of fabric for furniture is almost the same as the choice of fabric for covers for furniture, so if you do not know which fabric it is better to drag chairs, we recommend that you familiarize yourself with this article. And in general, if you have started a pleasant and joyful as a result of the furniture update procedure, then look at the coming section, you will not regret!
So, for tightening the cloth of the chair you will need:
- Actually, the chair itself,
- Protective clothing and glasses (work more pleasant to do in safe conditions) - glasses and apron, at a minimum,
- Pistol - Stapler (this will help you drag chairs without sewing, (as an option - hammer and small carnations),
- Antistepler (to remove old brackets),
- pliers,
- gum big thickness and density,
- Porolon, cotton, polyurethane foam in sheets.
- scissors, pencil, line,
- Fabric for upholstery.
Suppose here is your old chair:
Check if there is no cracks in the wood, whether the back is stagged, whether the design is stable. If necessary, tide the frame in the right places.
Turn the chair with legs up and unscrew the bolts that are fixed by the head to the chair frame (or disconnect the brackets connecting these details). Before removing the bracket, it is necessary to dress the glasses and take care of the eyes - they can fly away to any place!
Check out the wooden framework. If it is too thin and weak, then it is better to cut out of the plywood sheet another.
Put a surcharge on the cardboard and circle. Add an input width in 2-4 cm.
If the header is not solid, then make a grid from the rubber over the entire area (see photo).
Cut out of the foam rubber or polyurethane foam (and better, from both at once) the desired detail, taking into account the allowance. Put the cloth with double allowances.
Fold the layers sequentially (bottom-up): fabric, foam rubber, cotton, polyurethane base, sidoo. And stick the entire stepper around the perimeter - first from two opposite edges, then - everything else.
Tensioning the fabric before bonding, as stronger as possible.
Cut the surplus of fabric and foam rubber.
Treat the locations of the protrusions.
If the skeleton of the chair also needs to be upgraded, paint it with paint or use our lessons from the "Decoupage" headings.
Attach the bedroom to the chair.
And here he is your handsome backup!
http://www.trozo.ru/archives/16931#more-16931