Manufacturing Panel "Grapes"
When selecting the material, pay attention to the thickness, color and quality of the skin, from which the details of the future product will remain.
For cutting the berries of grapes, you should choose the skin thickening, since with heat treatment such a skin is easier to give the desired shape. Skin color can be different: light green, any shades of red or purple.
For leaves, thin skin is used, as it has accommodation. Skin color for leaves can be either green (any shades of green), or shades of brown. On the finished panel, it looks good when several colors immediately apply.
In order to cut the details of the leaves, it is necessary to make templates from cardboard, there are enough two templates of different sizes. For berries, you can use coins (1, 2 rubles). We supply the circuit of the pattern on the skin (leaves - 10 pcs, berries 30). In general, the number of parts depends on the size of the frame.
Strip the details on the circuit circuit. After the details of the leaves are carved, they should cut through the residence. Very neatly on the front of the skin cut through the knife of the residence, the whole complexity is that the skin should not be cut through, the cut depth is approximately half of the skin thickness. It is worth practicing on skin trimming.
The skin has a cleaning property at high temperature, use this property when the items need to give a spherical shape, as in our case, when it is necessary to give the shape of the berries of grapes. The outlet of the bervenus is put on the batchtime (invalid) side to the heated burner of the electrical tile. After a while, the skin begins to turn, taking a spherical shape. From time to time, it is necessary to move the billet with a hub on the burner so that the heat affects evenly, and it turned out the part of the right form.
After all the details of the berries are ready to start the heat treatment of the leaves. All accommodation on the leaves with this processing can be revealed simultaneously. Put the sheet for a few seconds face on the heated surface of the tile. Then tweezers turn the sheet to the wrong side if the bodies did not open, the action should be repeated. In this case, it all depends on the thickness of the skin. On the leaves, cut out of thinner leather, streaks will turn faster.
For the basis of the panel is used Fiberboard or hard cardboard. The size of the base depends on the size of the frame. Next, it is necessary to issue a background of the future panel. Material for the background you can choose any: leather, fabric, wallpaper, etc. It is only necessary to choose the color color color correctly so that it harmonies with the parts of the panel. After the material for the background is selected, it is glued to the base.
When all parts of the panel are ready to form a composition on the background. You need to try several options and choose the most successful.
The composition is ready, now it should be proceeded to glue parts. Do not break the compositions, glit every part of the panel to the background. It should be ensured that the glue does not fall on the free surface of the background.
For gluing parts, the glue "moment" is used. To glue the item to the background, we smear the thin layer of glue both glued surfaces and let it dry about five minutes, then press the missing item to the surface of the background. In order to stick the berries of grapes to the background, it is necessary to miss the contour of the part and immediately attach the berry detail to the background, so that the glue is imprinted on the surface of the background. Five minutes later, press the berry detail to the background. Good luck!