Found a great idea of the New Year tree. I will definitely do this)) In the meantime, I will share here, so as not to lose!
We make a cone from a cardboard sheet, glue, measure the line and fill the same distance from the cone to the bottom, cut off the excess part.
Cone ready. The stapler is attached to the base of the Mishuur cone. We have a green tinsel, because The most reminiscent of natural spruce:
Bilateral adhesive tape glue to the cone in a circle, the distance from the bottom is determined by the height of the candy so that a row of candies do not very much to shielded tinsel. You can make a pencil to make a mark where Scotch must be glued. When glue tape, you do not need to completely press to the cardboard, folds will still form. We remove the protective layer with the sticky part and pressed the candy for the candy for the "tail" wrapper. We try to place the settling of candies so that the cardboard is not shifted.
When a row of candies are laid out, fix them using a conventional tape, walking on top of the glued tails and grabbing cardboard over them.
I'll cover the place of gluing by Mishur, shifting it around the cone. Mishuur can also be fixed on double-sided adhesion in several places, and if it is not very thick, then you can wind into two rows.
Similarly, we glue the second row of candies for double-sided adhesion and fix over the usual tape. Fix the tinsel from above. We continue to alternate the rows of candy and tinsel.
Before winding the top, insert and secure the Tree Trees at the top of the cone: a beam of 3 - 5 candies, a Christmas tree or a tape loop.
Decorate the finished Christmas tree serpentine - and wonderful sweet New Year's gift is ready! Candy can be eaten, and the cone is the basis to use to create another Christmas tree.
Source http://www.bumik.ru/content/51/read601.html.