Materials: the finished plate of black, bulk contours of Metallic glass - gold, bronze, stained glass outline "Copper", varnish on glass.
1. To begin with, the drawing sketch did. I took the paper, covered the plate on it to make the drawing to pick up under its real size. A plate degreased with alcohol, a conventional marker redraws a drawing on a plate.
- If the first time does not work - the drawing will erase alcohol, you can erase only part of the pattern. By the way, you can cut the drawing of the paper on which we painted, or at all the outsider drawing, and then, applying to a plate, outlove the felt-tip pen.
2. Turning a plate to the light, outlined the contour drawing - under a certain tilt pattern with a felt-tip pen, even black, is clearly visible.
3. When the contour is dry, painted the drawing, the edges of the edge with alcohol (there by that time numerous prints were formed), brought Meandra along the contour.
4. When everything quickly dried, mixed your cat with alcohol and again neatly passed through a plate, removing the extra lines of the marker, fingerprints, etc.
- on the "free" sites can be pressed more, and in the figure, wipe, naturally, more careful, more gentle, although my drawing is not damaged at the same time. By the way, if there is no paint on glass, you can use acrylic paints, in several layers, and then cover in Several layers of nail polish "Golden" (and also tried). But here is the bulk contour, in my opinion, it is not necessary to replace anything, as it attaches a unique effect of the product.
5. At the end of all of the above works, covering the glass, at least 2 times, a small sponge, slow light movements, smearing it from the center to the edge of the "rays" of the Vangest.
- It is not necessary to hurry, you don't need to put pressure on the sponge, as well as contraindicated lacquer on the glass "stuff" with a sponge - there are bubbles, many bubbles that are dried up without blowing. I tried to bring with tassels of various widths and pile - the traces of the brush still turned out. In general, I advise you to try to work with a sponge and varnish on glass on some coffee saucer of black (on black you know the flaw), and then start creating on the main product. By the way, too much varnish on the sponge can not be recruited, it will flow on the bends of the plate with ugly soda (verified).
In general, the process is pleasant and interesting. Good luck to you!