The school was held a week for waste recycling. High school students had to come up with something useful from an economic point of view, but also those who are to do decor. My daughter and I did everything on the MK of this site and turned out so -
Thanks to everyone who puts their work here, your ideas and advice are very helpful. In this work, not the garbage is only glue and paint :).
And so, a vase is made of a cropped plastic bottle, there were works on the decoration of bottles of drapery. This technique uses any tissue that must be dipped entirely in PVA glue and soak well. Clay can be squeezed. Impregnated with glue cloth and drapes. I somehow sorry for me to pour out such a number of glue, the fabric does not absorb everything, so we smeared the bottle with glue and glued the fabric (we had a patchwork of green kapron tissue), on top of the fabrics again were well covered with glue, in this case, foldings are not so picturesque and Drapery does not frozen as a stone, but we are in this vase water and were not going to pour.
I asked a question in the comments to the MK drapery, but I haven't answered yet, so if there are ideas or experience, then share, please, will be very grateful - how to make the top and bottom edge of the vase neatly? I can assume that when the top edge , the fabric bends inside, then how to make the inner side carefully? The question is relevant, I want to make a pencil for my daughter in this technique. But the bottom of the vase for me is a mystery, if you bend under the bottom, how to make the vase not lose stability? We seams were visible, so the top and bottom of the beads were wound. In this technique, you can apply any decor on the fabric while the glue is not drying, because For us, it was the first experience, but it looked all this as a swamp, then waited until he dried up, then our vase looked more nicely, so the dry vase was already decorated - the folds were painted with silver paint, mixed and small salt, residues and crumbs of green chalk, A little bit of green beads and all this mixture was stuck in a chaotic order, mostly closing the flaws of our drapery. According to this technique, it is necessary to cover everything with varnish, we did not have a varnish at hand, so the decor was again covered with glue, so as not to feel. Vaverochka is ready.
Flowers made pieces of napkins, screwed on toothpicks, this is our first experience, the next time it should get better, the daughter decided to paint our roses. So that the roses lasted longer, covered them with PVA glue, then a little silver sequins added. In some photos, a corrugated chashelistic is visible, it is made of pencil cleaning - if the pencils are sharpener, then there are such waste, in this case it is plastic waste, and not wooden pencils. The first layer there is at all the spirals, and then such a corrugation. And from the spirals we made a Christmas toy, it turned out so -
But back to our vase. Rogulins were also seen in one of the MC. From the plastic bottle, the strips were cut and these strips were superseded over fire, the plastic temperature bends and acquires a bizarre form, it is not necessary to bring to the fire, otherwise plastic will start melting. The foam balls were pasted on the rogulines and all this painted with silver glitter. All rogulins fastened scotch tape on toothpick. In order for the composition to live longer, a piece of foam was put in a vase, and stuck flowers and rolled into this piece of foam. The visible surface of the foam was covered with the same mixture of salt and chalk. Decorated the composition with a silver ribbon.
Thanks again, everyone for interesting MK, ideas and advice.