From year to year, with the development of new technologies, many things go into non-existence. So sometime such necessary CD discs are now dusting on the shelves and in boxes: and throw out a pity, and what we do not know either with them. We offer you a creative solution to this problem.
We will need the following materials:
- CD discs (better those whose one side is completely smooth)
- Postcards (Napkins, Prints)
- White acrylic paint
- PVA glue
- Acrylic varnish
- cardboard
- Acrylic paints Color
- Emery paper scissors
one. Drive blade on both sides and stuffed with one layer of white paint with a sponge.
2. Cut the circle from the cardboard to disguise the hole in the disk. With the side where the irregularities are more glittering a bigger circle. Since it is a magnet wear, then it is not necessary to get rid of irregularities. And the same circle we will cover.
3. From the front side we glue smaller circles. How much depends on the thickness of the cardboard. If you have left and there is a groove around the hole, you can smear everything with a putty.
four. Again there are white paint, dry, whirlpool.
five. Now we are engaged in a postcard. Machine it in water at all for a long time, literally a few seconds, so that the whole wet. If you reap, the paint begins to burst and smell.
6. Then very carefully we relax a postcard. Again, if it is too wet, it will be bullied, if not sprinkled by the whole, then the upper layer will break off unevenly, flap from the lower layer of paper will remain.
7. Cover the image with a layer of acrylic varnish to save the image. Envy.
eight. We glue the image to the disk with the plow glue, carefully smoothing and kicking bubbles. Sorshev. Do you care superfluous from the edges.
nine. Making a hand.
10. Covered with both sides of varnish. Envy.
eleven. For the edges, we use a thin white cord. We glue it along the edge using transparent glue. From the inside of the disc, you can glue the magnet and decorate them with a refrigerator. Or looting and hang on the wall.
