The author of today's crafts will show how to make a wall shelf. It looks like this ordinary shelf on which you can put a pot with a flower, a photo or something else. But if you pull the shelf on yourself, a secret compartment will open, in which you can store valuable things. Well, let's say documents, jewels or money.
Personally, I, such an idea, I was very impressed and interested, honestly, the thought was already settled in my head, to make a similar design. In general, someone interested, I invite you to read this article, or you can see the species.
Materials and tools.
-Plywood
- Salecopic guides (for drawers)
-Sandpaper
-Gedi
-PVA glue
-Stationery knife
-Amamores on a tree
-Vints and dowels (for mounting to the wall)
-Electrol bzik
-Srupverte
-A hammer
-Porographer
Manufacturing process.
Immediately I want to make a reservation, all sizes are specified approximately, and depend on the desired size of the final product.
The author will make his creation from plywood, and it will be from two parts. Inner part, frame, he is a hidden compartment. And the outer part, the surface of the shelf, in essence, the box that will hide the secret compartment.
The author cuts off with an electric lobby from 8mm plywood leaf, four flat, about 50mm wide. For two of them, about 250mm and two more, about, about 600mm. The ends grinding sandpaper.
From these rails, the frame of the inside of the shelf will consist. The bottom of the inside the author does out of a thinner plywood, about 3mm thick. Which he cuts off the stationery knife by spending them on the plywood several times.
Of all these components, the author collects a shallow box, the ends of plywood at the same time, with the glue of PVA and then hesitates with nails.
On the side walls of the resulting drawer, the author screws telescopic guides for drawers.
Now the resulting design must be hidden by the box, it will also serve a shelf. The width of the inside of the box, should be peeling the drawer width along with the guides. The author cuts off from the plywood sheet three more rails that will be the ends of the box.
Side, short rails, the author screws to the outer parts of the guides. They nail the front bar, the lower part of the box, the author will do from a thinner sheet of plywood 3mm.
Since all the weight of the shelf will be held on the end, its inner part, the author strengthens this separation by wooden bars. Putting the bars to the bottom and the end on PVA glue and twisting with screws on a tree.
After checking the performance of the entire mechanism, the author fastens the top of the box, which he cut out of thin plywood.
Now the product must be given a more noble view. For this, the author puts off his surface, hiding all the irregularities and flaws flawed. After grinding with sandpaper, the author paints his homemade white paint.
After the homemade dried, it remains to attach the shelf to the wall. To do this, the author made holes in the end (fortified) shelf wall. Also, struck openings in the wall, symmetric holes in the shelf and attached the shelf to the wall with screws. Thus, fasteners, too, turned out hidden.
In general, it seems that everything, the shelf is ready for operation, but then the author remembered that he has polyurethane varnish in the farm. And he decided to open the surface of the shelf.
Now everything is accurate, you can safely place all sorts of baubles on the shelf, and in the hidden office, putting the money. Only if no one sees.)))