It was not solved for a long time, but still I want to boast (although I can not like someone and hear in my address a bunch of disassembrage ...).
Perhaps someone this technique is familiar - it is called quilling (pieces of pollocks).
I began to study for the restoration of shallow motility (there was an unsuccessful hand fracture ...). I have a lot of work, but recently (in the light of a large number of holidays) has made such postcards for friends
For operation, only paper is used (exception: on one of the postcards of the stamens from the "bells" - already ready, although it can be done on their own, as well as eyes / nose with cubs).
Card Card - Color Cardboard, Background - Napkins for Cups: This is the basis. In addition, for further work, instruments are needed - scissors (small, sharp), sewn, PVA glue (sufficiently dry and leaves no spots), thin tweezers. When I work with a corrugation (width of the strip - 1cm, this is the easiest, children can actively help), then cut it into 2 parts along for the manufacture of frills and ears and 4 parts along for the manufacture of colors.
To get a muzzle, twist one large disk, the tip of the strip is carefully fixed on the glue (the number of strips depending on the size of the muzzle), 0.5 from the total length of the strip leaves. That faces looked more effectively, slightly strifting it down (give it a lens shape ) And sample from the inside (so that the form keeps). A similar procedure is done with ears.
Flowers - Previously harvested strips (1/4 of the total width) cut on 5-6 parts, twist the disk and clamp on one side (give the shape of the droplet - it can be seen on green leaves. Note - you should not do too tight discs, otherwise then it will be It is difficult to give them a form. If the detail is obtained very tight - slightly dissolve it, and only then the leaks' tilt of the strips).
As soon as a sufficient number of junctions are ready - we put them in the flower, and we cover the core top with top of the joints. At the request, the flowers may be 4 and 6 petals (someone like). When a sufficient amount of blanks are recruited - we put them into the composition on glue.
Working with rice paper strips width 0.3mm more difficult, but the principle is the same. Bells - twisted a tight disk, the tip of the strip is fixed with glue. Then it takes Shilo (or pencil) and pushes: it turns out the Carnus, to which the stamens are delivered.
Roses - are made similarly roses from silk ribbons (for convenience, it is better to first chant the bends from the strip, and then twist / form a flower). Listers - a strip of green paper folds in half, leaves (desired shape / size) are cut, and then the "accommodation" is applied by tweezers.
The assembly depends entirely on your fantasy;))