And they have a snake hello. This is again I-Igor. I promised, I continue the topic-gifts for Easter. Allow you to imagine my collection of crosses, our own manufacture of the cast materials ..The cross-1 for the manufacture of this product will require a plate or plywood of a table. (Plywood worse, on the final product will be visible layers of plywood. But-too, you can) the size of 14x21cm. Tolerchina 0.5 cm. Tobzik. Wood-burner ) with a disk on metal. Profitable paper (fine-grained) and varnish (can not be lacquered, it also looks beautiful) process- 1-found on say tattoos (you can at any other).2-Printed on the printer.3-took a plank, translated through a copy-step 4-drank along the contour (named this cross I burned, with the help of this, too, a homemade apparatus. Love was pubesomized)
I will not dwell on it, I just need a device to be very necessary for those who do the needlework cuts everything (except for the metal) to whom it is interesting to write, let's tell the detail. 5-burned image inside. 6-grinder at the edges made dents (sections), and burned Roots.7-covered lacquer ... Ready. The second Cross of Proksass and the tools are the same as for the first cross. And still black and silver paint.t Third CrossVery lightweight in the manufacture. Material - thin plywood 18x26 cm. And with a thickness of 2-3 mm. Lobzik (I burned it, too, laziness-mother fill with a pubesomes) Morid or any paint (to taste), lacquer- (also to taste) The process is the same as in the first two, except for the 5th and 6th points. Fourth Cross
This is a completely different story. Material - Maramor (just in Portugal he is cheap), I didn't buy it either, but I found it in a dump. Size-15-21.5 cm. Thickness 2-cm (but if there is no marble, then you can and the wood, and hetaenax ..... etc, etc.--fantasize) on the cross. Spring and lead sign (I just started it) filmed out of the plasticine, then I made a shape in the gypsum, and poured lead (old batteries) lead I melted at home, on a gas stove (for which I got to catch up from my second half). Blucked by epoxy resin (can and strong glue). On the reverse side of the 3-mm drill, two holes drilled, put the hanger under the nail, also flooded with efl. Resin and hung on the wall. Ready. I will say goodbye to it. Once again, my dear Orthodox with the upcoming holiday Easter. P.S. If someone is trying to the stand with the fans under a laptop, from almost thrust materialsWrite to tell my advice to pay more attention, on different (apparent) trash and unnecessary things. With respect, Igor.
