Cute rings, was able to post only now.
Option number 1
While I did not come to mind this idea, I threw these rolls ...... The food film is cluttered on a roll of pressed paper, it was he who served me the base under the rings. With the help of a stationery knife, cut a ring width of 2 cm.
Another option for this business I used the foundation from under thin scotch, it turns out the plastic and at the same time round shape that it suits me, tape used for the purpose, and these things have adapted for another case.
I needed 1.5 meters thin ribbon. The edge of the tape was bonded to the base and began to wipe the tape to the base.
The ribbon needs to be treated tight ... and so to the end.
When the ring is ready, the end of the tape is glued inside the ring. That's all.
Then already like your fantasy works ......
For example, I did the same with the red ribbon, but I added another bow.
Here is an option with a white ribbon ...... just in the middle she launched a gold ribbon and tied
The same bow.
Here again this is a yellow ring ... .. Here I added red.
The same white ring ... .. Found in the shop of fittings here are such cute flowers (they are sold to the Method) and just glued to the ring, and from the tape made a bow.
Again a white ring ...... only this time I used the lace.
You can still use a tape for packing gifts instead of satin ribbon, but also thin. The principle of operation is the same as with a satin ribbon, nothing is obtained.
Option number 2.
Once came to the shop of fittings and found such interesting things ...... I am not special. In this case, and therefore, as it is called, I don't even have permission. It looks like a tape only a little more tight and in the middle of the colors are embroidered. Since it is wide, I cut the base of approximately 4.5 cm.
Printed the edge to the base and just wrapped the ring in a circle.
Cropped and stuck another edge.
The same option only used here with gold colors added flower and gold ribbon under the color.
Option number 3.
This option was the most difficult ...... Of course I tried to explain more accessible, but I do not know how much it happened to me. For several days I suffered with a thin ribbon, but the principle of work is not impaired, so I had to replay a little and I went to the store for a wide ribbon ................
For the base, you need a density cardboard (280 - 300 g / m) just if it is thinner when the paper is sewn up. I used a strip of 1 cm wide and 1 cm.
For this rings, a tape of two colors is needed, a thread with a needle and a cardboard strip.
In the corner recorded the edges of the tape (that is, they sewed),
The blue ribbon pushed a little back, and the golden at an angle was sewed to the other side of the paper, it is necessary to fix it in the middle of the tape, but to work on the edge of the cardboard.
And go back to another edge, so it turns out such a fold of the tape ... ..
Returning back fixing the tape exactly too (the middle of the tape is the edge of the cardboard). The main thing is to fix the ribbon very close otherwise, with a bend you will see the paper. And again we return to the other end of the paper and fix the tape.
Now on top of gold launched blue. Fixed.
And on the same principle: we carry out the ribbon to the other end of the paper and sew. Now we return back and also fix the tape.
Now let the top of the gold and do the same.
And so to the end ... ..
When you finished the cardboard by itself twisted and now you only need to connect the ends to the sewing to each other.
I hope it is clear if something is wrong (somewhere may incorrectly explained), you already sorry.
P.S.: Everyone finds its use to these rings ... .. For example, I use them for napkins, recently used for the festive decree ... you can still use for invitations to a scroll (of course if the number of invitations is not 150, otherwise these rings will simply dream ....).