This skirt-maxi is simple and universal. Sew skirt without pattern.
This skirt is suitable for summer, spring and autumn, can help make a daily or elegant set. It provides pockets, and a gum from behind in the belt makes it easy to remove and wear a skirt without a clasp. The skirt is sewn from a thin synthetic knitwear with a lining in tone.
You will need:
- thin synthetic knitwear;- lining fabric;
- Wide elastic belt for belt (3.5-4 cm);
- glue gasket;
- tape measure;
- line;
- marker for fabric;
- scissors;
- English pin;
- Portnovsky pins;
- sewing machine (and if there is - overlock) and threads;
- Iron and ironing board.
STEP 1
Put the details:
- 2 Details of the knitwear: Measure the bumping hips, multiply the value by 2.5 and divide into 2 - the width of the part; Skirt length + Package on seam from above - detail length;
- 2 parts made of lining fabric: bleeding beeder multiply by 1.5 and divide into 2 - parts width; The length of the details is the same as in the details of the knitwear;
- 2 details of the front of the belt, 1 of the lining fabric and 1 of the knitwear: Width - half-coupling the waist (of the place where you will wear a skirt - directly on the waist or below) + 2.5 cm + allowances for side seams; Height 11 cm;
- 2 parts of the back of the belt, 1 of the lining fabric and 1 of the knitwear: Width - Cooking Beader Minus Semi-Cold Waist Plus 2.5 cm; Height 11 cm;
- 4 parts burlap pocket from lining fabric; (Use the pocket pattern in the side seam of skirts from another model or download and print the pattern here or here);
- Gasket for belt from the laying material: Width is equal to the width of the belt parts, the height is equal to the width of your rubber;
- Elastic ribbon: The length of the desired cut is equal to the half-coupling of the waist.
Find the middle line on the back of the belt along the detail. Stick the strip of the gasket so that its upper edge coincided with the middle line of the belt details. Repeat with the detail of the front of the belt.
Step 2.
Details from the knitwear fold the front parties to the outside. From above on the sides, measure the distance of the inputs into the pockets and set the labels. Sustrate the front and rear cloth to the French seam labels (how to execute it, read here or watch the video here).
Details of the lining fold the front sides inside, tagged tags. Sustrate the side seams to labels on overlock or by car, having paved a simple line and then processing the edge by zigzag.
Step 3.
Having retreated 1 cm from the top edge, laid on the front and rear panels from the knitwear line with a large stitch length. Insert the lining in the skirt. Select the front and rear sheet of knitwear to the width of the lining parts. Scaliate the front panels from the lining and from the knitwear and retreating 0.5 cm from the line down, pave the same line.
Step 4.
Details of burlap pockets fold two facial sides inside, sew and process seams, except inputs in pocket.
Skirt Remove inside out, put your pockets between the front and rear parts and pinch the pins, exciting and knitwear, and lining. Sew pockets and process seams.
Step 5.
Fold the front parts of the belt of knitwear (face down) and from the lining fabric (face down) and susht the long sides. Repeat with the back of the belt rear items. The belt details fold to face, sew the short sides in the ring and process the seams.
Step 6.
Select the front cloth to the width of the front part of the belt. Just do with the rear panels, focusing on the detail of the back of the belt.
Hanging the front and rear panel on top of 2 cm.
Align the edges of the belt and skirts, as shown in the photo, scalp the pins. Sew the belt with a skirt and treat the seam.
Step 7.
Remove the skirt inside out. Belt fold along the center line, turn inside that the fold is slightly lower than the seam, and stick to the pins. Put the seam from the front side so that the line so that the lines take place along the line of the belt and skirt. Sew so belt only from behind.
Insert the elastic tape into the back of the belt and the trick of its edges on the sides. Then sustain the front of the belt.
Step 8.
Align the head of the skirt. Make a 2.5-5 cm lining shorter skirt. Treat the bottom of the skirt and lining.