Stay home! And go along with Burda Style on our patterns beautiful and comfortable home clothing. For a start, for example, loose pants without a belt. Easy, quickly and without excess costs.
To really quickly sew pants for the house, but at the same time not to lose in quality, you will need an overlock and a simple pattern.
Overlock is predominantly used to sewing products from knitwear, as well as to coop out open seams and seam points. But at the same time, any overlock performs two functions at the same time - steps the parts and takes the cuts of points on the seams, which is extremely convenient and saves time. This means that on Overlock you can sew a whole product from ordinary tissue.
For these purposes, a four-year-old action-rapid seam is perfect.
Recommended fabrics:
Viscose and silk fabrics, flax.Depending on the selected fabric and the image as a whole, on this pattern you can sew not only the pants for the house, but also summer, and the pants in the style of Casual.
Pattern Pants and Her features
For domestic trousers, I chose a simple pattern, model 104 of Burda Style 2/2020:
✂ The model is quite free, so you can safely take a pattern size less.
✂ Rear halves of trousers are significantly broader than the front, as a result of which the impression is created that the side seam "leaves" for the feet.
✂ The upper cut of the trouser is almost on the waist, so I refused the dial belt, as I like (and more comfortable) lower trouser landing, especially if the model is free, without a belt and clasp.
✂ But during the sewing process, I lowered the top cutting trouser line for another 3 cm.
✂ refused all the proposed pockets.
✂ Pants length on side seam ok. 108 cm, which allowed not to increase it on my height (172 cm).
Quick-pants on overlock
The sewing machine in this case will only be needed to perform a scene for elastic ribbon and feeding pants.
STEP 1
Reset the pattern on the tracing and cut out.
Details of the paper pattern impose on the fabric, stick and clean the cutting on sections - 1 cm, along the lower edge of the trousers - 4 cm, along the upper cut of the trouser 1.5-2 cm (depending on the width of the elastic ribbon).
Step 2.
Front and rear details fold the front sides to each other.
Scoop and perform side seams.
Step 3.
Scoop and follow stepper seams.Step 4.
One half trousers twist on the front side.
Then put it in another half of the trousers with the front sides to each other.
Skolit and become the middle cuts by combing stepst seams.
Step 5.
Musture, and then start all the seams.Step 6.
Treat on overlock upper cut trousers
And lower cuts of the trousers.
Shuffle.
Step 7.
Screw to the bottom of the niza hole to the wrong side, pinch the portno pins (or start) and pour.
Mustle.
Step 8.
Drinking on the top cut trousers to open on the wrong side, outtage and run away, leaving the small hole not sewn.
Step 9.
In the open hole to inhale the elastic tape using the English pin.
The ends of the elastic ribbon impose on each other and stir together.
Open hole squeeze manually.
Ready!