When we, with our own hands, are needed, various tools are needed, fixtures but not to smash and simply not really have everything. Therefore, the insigning craftsman usually uses various homemade adaptations from what is at hand. In this article, only a small part of the masters came up with.
Required device: Sawdust drive
Having equipped the workshop, I decided to remove very small sawdust from the milling machine. The dust homing systems that comes on sale were too expensive, and I decided to make a similar device myself.
A vacuum vacuum cleaner was attached to a rigid plastic barrel cap. A dense fit was provided with a rubber seal, and the impermeability of the lid itself is a sealant. At the top of the barrel cut the hole 100 mm and the screws attached the fitting for the hose of the vacuum cleaner. The input of the dust collector was selected by the rubber gasket. With the attached flexible hose, the extractor works efficiently, and the barrel is easily unloaded.
Ring-indicator
When drilling a hole in the wall with a manual electric door to make it strictly horizontal, it is not always possible. A rubber washer with a hole can help, the diameter of which is more drill. The washer, who reliably on the drill and having the possibility of free movement on it, when the drill is tilted up will move towards the cartridge drill, and when the slope is down - to be removed from it. To try to try so that the washer remains in one place. This means that the drill is in a horizontal position.
Fixture: Circle Joiner
Circle that can be conducted with a circle with a diameter of up to 900 mm, can be made of tongs for linen, two steel stripes and arrows from the game of darts. If you can not find linen tongs, the legs can be made of trimming enough hardwood, better buckus. The upper ends of the circular legs are connected by a spring steel strip, in the lower ends, the holes for the pencil and the arrow tip are drilled. Fix a pencil and tip with small screws-self-storms. The circulator's feet of the circulator's solution consists of two steel plates connected by a bolt with a bars nut. Other ends of the plates are fixed on the feet of the circulation.
Capped caps from ballpoint balls
Tanks with glue are usually equipped with regular caps that often come off. They can be replaced with caps from ballpoint pens. And the color of the cap from the ballpoint handle will additionally inform about the contents of the bottle.
Fixes for milling
A sample of a certain depth and width into the board of the board can be made by a manual milling with a simple device (see Fig.), Which provides constant dive parameters of the cutter in the board when the milling milling is moving along it.
Pen for clamp
I was always annoyed by a handle with a gate of a cutlery clamp, for which I was always lying to cling to something. I replaced the knob with a wooden cylindrical handle. To fix the knob on the screw, drilled the hole in it, put the bolt and delayed the nut.
Bear for sharpening drills
When sharpening tools, high speed sharpened - a big advantage, but it is often difficult to maintain the right sharpening angle. You have to remove the tool from the girlfriend and dip it into the water.
It helps me a small wooden block that is tightly put on a metal girlfriend. Thus, the angle of the tool based on it (the chisels or iron rubles) when contacting the grinding circle is always the same.
Most often, the tools are sharpened at a standard angle, so several small blocks of nozzles on the standard girlfriend will help in most situations. To get an accurate necessary angle, I processed the ends of the metal plate at the angle of sharpening and used it as a template for installing a wooden block.
Without changing the positions of the main girlfriend, the unit can be replaced in a few seconds.
