Today we will tell you how to make a smoking room and a smoke generator from the old electric oven.
Hello. For a long time I ripe on smoking, everything neither how hands did not reach tightly to do this issue. Here finally appeared time and opportunity.
And the world was a miracle here:
Smokehouse itself, this is the ancient Soviet electric oven "Kharkov M", long ago, it was prevented under his feet in the garage. Finally it has applied)
From the fact that it was upgraded in it, it made a collapsible body. And added the thermostat.
The regulator gave us the opportunity to clearly maintain the required temperature when hot smoked.
If they are cold, then the regulator is not used.
Also in the inside it was clearly fitted with a cut grid for the mantle.
And even it turned out two tiers.
A separate topic is a smoke generator. There are many options for them, everyone picks up for their needs.
There is nothing difficult, as always :)
Pipe with screw nuts under 1/2 and m16
1/2 This is the yield of smoke, and 16 is screwed up a thin tube for supplying air from the compressor. Compressor, aquarium.
On the pipe 1/2, the slits were made, they suck in the smoke of them.
A couple more photos for clarity
The covers were also made, on the bottom and the top of the smoke generator.
In principle, everything is all. You can lock the smoke generator with smoking and shock itself.
As you can see the work is not complicated, you can meet in a couple of days, not counting painting.
Also, the smokehouse can easily be replaced with a modern electric oven.
That's all. Thanks for attention:)
P.S. The most detailed info for the manufacture of this smoke can be seen on my video.
