I grew by me Passiflora, I sat for three years and didn't bloomed Iraza :( on MK Passiflora:
http: //beadedflowers.tripod.com/International/patterns/passi ...
I really smelled to me in the soul, I made a translation for myself with the help of the program in my computer, I personally became clear to me.
Here is the translation itself:
We will need: (approximate weight)
- · Copper wire (0.30 mm)
- · Green wire (0.31 mm)
- · 100-gram green beads 11/0
- · 80 gram light green beads 11/0
- · 40-gram elephant bone painted beads 11/0
- · 20-gram eggplant painted beads 11/0
- · 10-gram blue beads 11/0
- · 5-gram yellow beads 11/0
- · Green flower tape
- · Part of a thick metal wire to create a wreath, approximately 80 cm
Create 7 green as balazhan anthers:
1. Place 11 eggplants painted by beads on a copper wire. Leave 20 cm between beads and start the wire. Insert the wire back through the first 6 beads.
2. Repeat it twice on the same wire. Disconnect the wires, leaving the same length. Salary 3 light green beads in both wires and 1 light green bead on 1 wire. Check the wires together.
Img. one
Img. 2.
Create 7 green-yellow anthers:
1. Place 4 light green and 3 yellow beads on a copper wire. Leave 35 cm between beads and start the wire. Insert the wire back through the first 2 yellow beads.
2. Place 3 more yellow beads and insert back through the first 2 yellow colors and green beads.
3. Repeat 4 times.
Img. one
Img. 2.
Img. 3.
Create 7 eggplants painted by anthers:
1. Tension the amount of dark lilac beads on the copper wire. Create loops with 7 beads.
2. Create a total of 5 loops close to each other.
Img. one
Img. 2.
Create 14 multicolored anthers:
1. Place 2 light green, 3 eggplants, 4 ivory and 4 blue bleeds on a copper wire. Leave at least 65 cm between beads and the start of the wire.
2. Place 3 eggplants, 4 ivory and 4 blue beads and insert back across the first 3 blue colors, 4 ivory, 3 eggplant and 2 light green beads.
3. Repeat 6 times so that a total of 14 'stick' have been made.
One flower contains 2 of these anthers.
Img. one
Img.2
Img.3.
Make 35 leaf Bi-colored:
1. Take 60 cm of copper wire and according to the main technique 1, place the following number in the middle of the wire:
1 Light green, 1 ivory.
Take both wires together and place one ivory bead.
2. Place 15 ivory beads in each of the wires. Take both wires together and place one ivory bead.
3. Take one of the wires and place 19 ivory beads. Insert an ivory bead Throught Uppper.
4. Place another 19 ivory beads in the same wire, and leadership retreat. Take the wires together and place one ivory bead.
5. Take the longest wire and place 22 light green beads. Insert the wire through the top green bead.
6. Place another 22 light green beads in the same wire, and leadership retreat. Carry the wired ends together.
Each flower contains 5 of these leaves.
Img. one
Img. 2.
Img. 3.
Img. four
Img. five
Img. 6.
Create another 35 leaves As described above (5 leaves in the flower), but now only use light green beads. These leaves are a little more so use the following number:
In step 2 use: 17. Beads in the land plot 15
In step 3 and 4: 21. Bead in the land section 19
In step 5 and 6: 24. Beads in the land 22
The flower assembly begins with 1 green as an eggplant of the anther, 1 green-yellow anther, 1 dark violelist, 2 multi-colored anthers, 5 bi-coloured leaves and 5 green leaves.
Wrap wired ends with a flower tape.
Make 2. Booton:
Use light green beads on the copper wire.
Using the main technique 4, create 5 loops of 11 beads and form it into the ball.
Create 10 lobes for buds using light green beads:
1. Take the copper wire (40 cm) and place 1 bead in the middle of the wire. Take both wires together and place 1 bead.
2. Place 12 beads in each of the wires. Take both wires together and place 1 bead.
3. Place 16 beads in one wire and insert through the upper bead.
4. Place another 16 beads in the same wire, and step back, check the ends of the wires together.
Bud consists of 5 petals.
Img. one
Img. 2.
Img.3.
Img.4.
Tension a large number of green beads on the green wire and create the following number of leaves using the main technique 1:
18 x Leaves 1: 1-2-3-4-5-6-7-8-8-8-8-8-7-6-5-4-3-2-1
40 x Leaves 2: 1-2-3-4-5-6-7-7-7-7-7-6-5-4-3-2-1
11 x Leaves 3: 1-2-3-4-5-6-6-6-6-6-5-4-3-2-1
42 x Sheet 4: 1-2-3-4-5-5-5-5-5-4-3-2-1
8 x Leaves 5: 1-2-3-4-4-4-4-4-3-2-1
6 x Leaves 6: 1-2-3-3-3-3-3-2-1
Now create:
- · 18 leaves (a) with 1x sheet 1, 2x sheet 2 in 2x sheet 4
- · 4 sheets (b) with 1x sheet 2, 2x sheet 3 in 2x sheet 5
- · 3 sheets (C) with 1x sheet 3, 2x sheet 4 in 2x sheet 6
And make them as shown below.
Use 60 cm green wire to create curls.
Roll the wire and ventilate it together.
1. Over the wire around the knitting needles 3.
2. Remove the knitting needles and leave 4 cm stem.
Make 18 of these curls.
Img. one
Img. 2.
Passion flower connection:
- · We take 1x sheet C and curl and reduce 2.5 cm with green wire
- · We take 1x sheet C and curl and retreat the distance 3 cm
- · We take 1x sheet C, bud and curls and retreat the distance of 3.5 cm
- · We take 1x leaf B, bud and curl and retreating distance 4 cm
- · Take 1 flower, 1x leaf B and curl and retreating distance 4.5 cm
- We take 1x leaf B and curl and retreating a distance of 5 cm
- We take 1x sheet A and curl and retreat the distance 5 cm
- We take 1 flower, 1x sheet A and curl and retreating distance 5 cm
- We take 1x sheet A and curl and retreat the distance 5 cm
- · Take 1 flower, 1x sheet A and curl and retreating a distance of 5 cm
- We take 1x sheet A and curl and retreat the distance 5 cm
- · Take 1 flower, 1x sheet A and curl and retreating a distance of 5 cm
- We take 1x sheet A and curl and retreat the distance 5 cm
- · Take 1 flower, 1x sheet A and curl and retreating a distance of 5 cm
- We take 1x sheet A and curl and retreat the distance 5 cm
- We take 1 flower, 1x sheet A and curl and retreating distance 5 cm
- We take 1x sheet A and curl and retreat the distance 5 cm
- We take 1 flower, 1x sheet A and curl and retreating distance 5 cm
- We take 1x leaf A and retreat the distance 5 cm
- We take 1x leaf A and retreat the distance 5 cm
- We take 1x leaf A and retreat the distance 5 cm
- We take 1x leaf A and retreat the distance 5 cm
- We take 1x leaf A and retreat the distance 5 cm
- We take 1x leaf A and retreat the distance 5 cm
- We take 1x leaf B and retreat the distance 5 cm
Bend the metal wire into the circle and wrap the floral garland around it. It will go around approximately 2-3 times. Place a wreath in a pot with a gypsum base.
Here is my abrasive !!!!!
