This dress is easy to repeat even with small sewing experience. To sewing such a dress, we will need about 1.30 M knitwear with a width of 1.50 m. The length of the finished dress turned out to be 95 cm. If you need a dress with a more authentic, take a little more fabric.
We take the pattern of the usual dress of the fitted silhouette and on the front cloth are applied here such simiring lines:
Cut the parts and cut them on the rays, not reaching the edge of 0.5 cm. Slip and get such details. The larger the distance between the rays, the more assembly in the drapery.
We close the ottachka on the coquette and connect with the right barrel, and the front panel skirt with the left barrel.
These are the details of the cut from us should turn out.
The back is carved by collapse. Since the knitwear is very stretched, the allowance to the pattern itself did not.
To begin with, sew seam specified on the drawing of the red line.
To do this, fold the part in half, we rock pin and start scattering from the bend at a distance of 3-3.5 cm so that we have a hole in which we will be traded by the item.
If you deploy our stitched parts, an assembly will be built in the corner. We tie the nodules and at the beginning of the incorrect lines make the leaf on the ordinary typewriter, in order to avoid gaps of knitwear.
Now the top detail of the dress is done in the resulting hole.
Making leaps.
In the same way, sew two other seams.
View from the offline of our stitched parts.
Here is such a node with us to get.
Stitching the middle part of the back.
It remains to sew only side and shoulder seams.
Since the author does not particularly like lines at the bottom of the dresses, then she kept the bottom of the secret seam "Kozlik", bending 2 times 2 cm.
On the front side of the punctures is almost not visible.
In the same way, we laugh at 0.4-0.5 cm. The neck and armor.
Dress ready!
